Blog

manufacturing-pmi-at-52.8%;-july-2022-manufacturing-ism-report-on-business

Manufacturing PMI® at 52.8%; July 2022 Manufacturing ISM® Report On Business®

New Orders and Employment Contracting; Production and Backlogs Growing; Supplier Deliveries Slowing at a Slower Rate; Raw Materials Inventories Growing; Customers’ Inventories Too Low; Prices Increasing at a Slower Rate; Exports and Imports Growing; Record-Long Lead Times for Production Materials and MRO Supplies

,  /PRNewswire/ — Economic activity in the manufacturing sector grew in July, with the overall economy achieving a 26th consecutive month of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee:

“The July Manufacturing PMI® registered 52.8 percent, down 0.2 percentage point from the reading of 53 percent in June. This figure indicates expansion in the overall economy for the 26th month in a row after a contraction in April and May 2020. This is the lowest Manufacturing PMI® figure since June 2020, when it registered 52.4 percent. The New Orders Index registered 48 percent, 1.2 percentage points lower than the 49.2 percent recorded in June. The Production Index reading of 53.5 percent is a 1.4-percentage point decrease compared to June’s figure of 54.9 percent. The Prices Index registered 60 percent, down 18.5 percentage points compared to the June figure of 78.5 percent; this is the index’s lowest reading since August 2020 (59.5 percent). The Backlog of Orders Index registered 51.3 percent, 1.9 percentage points below the June reading of 53.2 percent. The Employment Index contracted for a third straight month at 49.9 percent, 2.6 percentage points higher than the 47.3 percent recorded in June. The Supplier Deliveries Index reading of 55.2 percent is 2.1 percentage points lower than the June figure of 57.3 percent. The Inventories Index registered 57.3 percent, 1.3 percentage points higher than the June reading of 56 percent. The New Export Orders Index reading of 52.6 percent is up 1.9 percentage points compared to June’s figure of 50.7 percent. The Imports Index grew again in July, up 3.7 percentage points to 54.4 percent from 50.7 percent in June.”

Fiore continues, “The U.S. manufacturing sector continues expanding — though slightly less so in July — as new order rates continue to contract, supplier deliveries improve and prices soften to acceptable levels. According to Business Survey Committee respondents’ comments, companies continue to hire at strong rates, with few indications of layoffs, hiring freezes or headcount reduction through attrition. Panelists reported higher rates of quits, reversing June’s positive trend. Prices expansion eased dramatically in July, but instability in global energy markets continues. Sentiment remained optimistic regarding demand, with six positive growth comments for every cautious comment. Panelists are now expressing concern about a softening in the economy, as new order rates contracted for the second month amid developing anxiety about excess inventory in the supply chain. Demand dropped, with the (1) New Orders Index contracting again, (2) Customers’ Inventories Index remaining at a low level but approaching 40 percent and (3) Backlog of Orders Index decreasing but still in growth territory. Consumption (measured by the Production and Employment indexes) was mixed during the period, with a combined positive 1.2-percentage point impact on the Manufacturing PMI® calculation. The Employment Index contracted for the third month in a row after expanding for eight straight months (September 2021 through April), but panelists again indicated month-over-month improvement in hiring ability in July. Challenges with turnover (quits and retirements) and resulting backfilling continue to plague efforts to adequately staff organizations. Inputs — expressed as supplier deliveries, inventories and imports — continued to constrain production expansion, but to a significantly lesser extent compared to June. The Supplier Deliveries Index indicated deliveries slowed at a slower rate in July, which was supported by an increase in the Inventories Index. The Imports Index continued to expand in July after one month of contraction preceded by six straight months of growth. The Prices Index increased for the 26th consecutive month, at a much slower rate compared to June.

“Four of the six biggest manufacturing industries — Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; and Machinery — registered moderate-to-strong growth in July.

“Manufacturing performed well for the 26th straight month. There are signs of new order rates softening — cited in 16 percent of general comments, compared to 17 percent in June — as panelists are increasingly concerned about excessive inventories and continuing record-high lead times. Employment activity remained strongly positive in spite of the uncertainty with new order rates,” says Fiore.

Eleven manufacturing industries reported growth in July, in the following order: Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Petroleum & Coal Products; Printing & Related Support Activities; Computer & Electronic Products; Transportation Equipment; Machinery; Textile Mills; Primary Metals; Plastics & Rubber Products; and Electrical Equipment, Appliances & Components. The seven industries reporting contraction in July compared to June, in the following order are: Wood Products; Furniture & Related Products; Paper Products; Miscellaneous Manufacturing; Fabricated Metal Products; Food, Beverage & Tobacco Products; and Chemical Products.

WHAT RESPONDENTS ARE SAYING

  • “Material extended lead times still affecting business, and the challenging labor market is a huge factor too. Backlog is healthy; we just cannot deliver to customers due to material issues.” [Computer & Electronic Products]
  • “Inflation is slowing down business. Overstock of raw materials due to prior supply chain issues and slowing orders.” [Chemical Products]
  • “Chip shortages remain; however, the COVID-19 lockdowns in China are presenting even worse supply issues.” [Transportation Equipment]
  • “Growing inflation is pushing a stronger narrative around pending recession concerns. Many customers appear to be pulling back on orders in an effort to reduce inventories.” [Food, Beverage & Tobacco Products]
  • “New order entry has slowed down slightly; however, logistical issues have yet to improve. Long lead times for materials and labor shortages are still a major problem.” [Machinery]
  • “Our markets are still holding up; however, I believe a slowdown is coming. We are cautious about going out too far with orders. Also, I believe the general market is in the beginnings of a recession.” [Fabricated Metal Products]
  • “All markets are extremely busy but face headwinds that will eventually take a toll. Lead times and costs make large projects very challenging to budget, plan and execute. Routine work is also very difficult.” [Nonmetallic Mineral Products]
  • “Current order books are full, but there have been signs of a slowdown beginning in the fourth quarter.” [Plastics & Rubber Products]
  • “Slight improvement projected for our business for the next quarter.” [Primary Metals]
  • “Continuing delivery and staffing issues have eaten away the bottom line.” [Textile Mills]

MANUFACTURING AT A GLANCE

July 2022

Index

Series

Index

Jul

Series

Index

Jun

Percentage

PointChange

Direction

Rate of

Change

Trend*

(Months)

Manufacturing PMI®

52.8

53.0

-0.2

Growing

Slower

26

New Orders

48.0

49.2

-1.2

Contracting

Faster

2

Production

53.5

54.9

-1.4

Growing

Slower

26

Employment

49.9

47.3

+2.6

Contracting

Slower

3

Supplier Deliveries

55.2

57.3

-2.1

Slowing

Slower

77

Inventories

57.3

56.0

+1.3

Growing

Faster

12

Customers’ Inventories

39.5

35.2

+4.3

Too Low

Slower

70

Prices

60.0

78.5

-18.5

Increasing

Slower

26

Backlog of Orders

51.3

53.2

-1.9

Growing

Slower

25

New Export Orders

52.6

50.7

+1.9

Growing

Faster

25

Imports

54.4

50.7

+3.7

Growing

Faster

2

OVERALL ECONOMY

Growing

Slower

26

Manufacturing Sector

Growing

Slower

26

Manufacturing ISM® Report On Business® data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes.

*Number of months moving in current direction.

COMMODITIES REPORTED UP/DOWN IN PRICE AND IN SHORT SUPPLY

Commodities Up in Price Adhesives and Paint (8); Aluminum* (26); Caustic Soda (5); Corrugate (6); Corrugated Packaging (21); Crude Oil (3); Diesel Fuel* (19); Electrical Components (20); Electricity (2); Electronic Components (20); Freight (21); Labor — Temporary (15); Logistics Services; Maintenance, Repair and Operating (MRO) Supplies; Natural Gas* (13); Petroleum Based Products (3); Plastic Resins* (7); Polyethylene; Rubber Based Products (12); Solvents; and Steel Products* (23).

Commodities Down in Price Aluminum* (3); Aluminum Products; Copper; Diesel Fuel*; Lumber (2); Natural Gas*; Plastic Resins* (2); Steel (3); Steel — Carbon; Steel — Hot Rolled (3); and Steel Products*.

Commodities in Short Supply Adhesives and Paints; Aluminum; Electrical Components (22); Electronic Components (20); Hydraulic Components (3); Labor — Temporary (15); Plastic Resins (3); Resin Based Products; Rubber Based Products (2); Semiconductors (20); and Steel Products (4).

Note: The number of consecutive months the commodity is listed is indicated after each item. 

*Indicates both up and down in price.

JULY 2022 MANUFACTURING INDEX SUMMARIES

Manufacturing PMI

® 

The U.S. manufacturing sector grew in July, as the Manufacturing PMI® registered 52.8 percent, 0.2 percentage point lower than the June reading of 53 percent. “The Manufacturing PMI® continued to indicate sector expansion and U.S. economic growth in July. Three of the five subindexes that directly factor into the Manufacturing PMI® (Production, Supplier Deliveries and Inventories) were in growth territory. Of the six biggest manufacturing industries, four — Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; and Machinery — registered moderate-to-strong growth in July. The Production Index decreased 1.4 percentage points but remained in expansion territory. The Supplier Deliveries Index slowed at a slower rate while the Inventories Index increased, indicating at least a slight easing of supply chain congestion. Eight of the 10 subindexes were positive for the period; a reading of ‘too low’ for the Customers’ Inventories Index is considered a positive for future production,” says Fiore. A reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally contracting.

A Manufacturing PMI® above 48.7 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the July Manufacturing PMI® indicates the overall economy grew in July for the 26th consecutive month following contraction in April and May 2020. “The past relationship between the Manufacturing PMI® and the overall economy indicates that the Manufacturing PMI® for July (52.8 percent) corresponds to a 1.4-percent increase in real gross domestic product (GDP) on an annualized basis,” says Fiore.

THE LAST 12 MONTHS

Month

Manufacturing

PMI®

 

Month

Manufacturing

PMI®

Jul 2022

52.8

 

Jan 2022

57.6

Jun 2022

53.0

 

Dec 2021

58.8

May 2022

56.1

 

Nov 2021

60.6

Apr 2022

55.4

 

Oct 2021

60.8

Mar 2022

57.1

 

Sep 2021

60.5

Feb 2022

58.6

 

Aug 2021

59.7

Average for 12 months – 57.6

High – 60.8

Low – 52.8

New OrdersISM®‘s New Orders Index dropped to 48 percent in July, a decrease of 1.2 percentage points compared to the 49.2 percent reported in June. This indicates that new order volumes contracted again after growing for 24 consecutive months. “Only one of the six largest manufacturing sectors — Computer & Electronic Products — increased new orders at a moderate level. Lead times remain at elevated levels, and fundamental raw material prices continue to persuade buyers to remain on the sidelines. Also contributing to order-placement pauses are concerns about future economic growth slowing and the impact to manufacturing inventories caused by additional order placements, which could impact working capital in the near-to-moderate term. Backlogs continued to sag due to the weakness in new orders,” says Fiore. A New Orders Index above 52.9 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

Of the 18 manufacturing industries, four reported growth in new orders in July: Nonmetallic Mineral Products; Printing & Related Support Activities; Primary Metals; and Computer & Electronic Products. Seven industries reported a decline in new orders in July, in the following order: Wood Products; Furniture & Related Products; Fabricated Metal Products; Miscellaneous Manufacturing; Plastics & Rubber Products; Chemical Products; and Machinery. Seven industries reported no change in new orders in July as compared to June.

New Orders

%Higher

%Same

%Lower

Net

Index

Jul 2022

17.2

63.0

19.8

-2.6

48.0

Jun 2022

17.8

65.1

17.1

+0.7

49.2

May 2022

28.2

58.5

13.3

+14.9

55.1

Apr 2022

25.1

64.0

10.9

+14.2

53.5

ProductionThe Production Index registered 53.5 percent in July, 1.4 percentage points lower than the June reading of 54.9 percent, indicating growth for the 26th consecutive month. “Of the top six industries, three —Petroleum & Coal Products; Computer & Electronic Products; and Transportation Equipment — expanded in July. Materials availability continues to show signs of recovery, but factories are still struggling to hit optimum output rates, primarily due to high levels of employee turnover,” says Fiore. An index above 52.4 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

Five industries reported growth in production during the month of July: Apparel, Leather & Allied Products; Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; and Plastics & Rubber Products. The six industries reporting a decrease in production in July — in the following order — are: Wood Products; Textile Mills; Miscellaneous Manufacturing; Fabricated Metal Products; Electrical Equipment, Appliances & Components; and Food, Beverage & Tobacco Products. Seven industries reported no change in production levels in July as compared to June.

Production

%Higher

%Same

%Lower

Net

Index

Jul 2022

24.9

58.5

16.6

+8.3

53.5

Jun 2022

27.4

60.9

11.7

+15.7

54.9

May 2022

23.9

59.2

16.9

+7.0

54.2

Apr 2022

27.5

61.0

11.5

+16.0

53.6

EmploymentISM®‘s Employment Index registered 49.9 percent in July, 2.6 percentage points above the June reading of 47.3 percent. “The index contracted for the third straight month after an eight-month period of expansion. Of the six big manufacturing sectors, three (Transportation Equipment; Petroleum & Coal Products; and Machinery) expanded. Although an overwhelming majority of survey panelists again indicate their companies are hiring, they are still struggling to meet labor management plans. Improvement signs are mixed: A smaller share of comments (7 percent in July, down from 14 percent in June) noted greater hiring ease, and among respondents whose companies are hiring, 35 percent expressed difficulty in filling positions, down from 42 percent in June. Turnover rates remain elevated, with 39 percent of comments citing backfills and retirements, an increase from 29 percent in June. Employment levels, driven primarily by turnover, remain the top issue affecting production growth,” says Fiore. An Employment Index above 50.5 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Eight of 18 manufacturing industries reported employment growth in July, in the following order: Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Printing & Related Support Activities; Transportation Equipment; Petroleum & Coal Products; Plastics & Rubber Products; Machinery; and Electrical Equipment, Appliances & Components. The six industries reporting a decrease in employment in July — in the following order — are: Textile Mills; Paper Products; Primary Metals; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; and Chemical Products.

Employment

%Higher

%Same

%Lower

Net

Index

Jul 2022

22.0

59.4

18.6

+3.4

49.9

Jun 2022

17.9

63.7

18.4

-0.5

47.3

May 2022

21.8

55.4

22.8

-1.0

49.6

Apr 2022

21.0

61.9

17.1

+3.9

50.9

Supplier DeliveriesThe delivery performance of suppliers to manufacturing organizations was slower in July, as the Supplier Deliveries Index registered 55.2 percent, 2.1 percentage points lower than the 57.3 percent reported in June. Of the top six manufacturing industries, five (Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; Machinery; and Chemical Products) reported slower deliveries. “This indicates the best supplier deliveries performance since July 2020, when the index registered 55.9 percent as business began to resurface after the initial pandemic lockdowns. Deliveries slowed at a slower rate compared to the previous month — 21.4 percent of panelists reported slower deliveries in July, compared to 27.4 percent in June. Panelists’ comments indicate that suppliers, despite their labor problems, performed better in July compared to previous months,” says Fiore. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

Ten of 18 manufacturing industries reported slower supplier deliveries in July, in the following order: Textile Mills; Paper Products; Nonmetallic Mineral Products; Primary Metals; Miscellaneous Manufacturing; Petroleum & Coal Products; Computer & Electronic Products; Transportation Equipment; Machinery; and Chemical Products. Five industries reported faster supplier deliveries in July as compared to June: Wood Products; Electrical Equipment, Appliances & Components; Furniture & Related Products; Plastics & Rubber Products; and Fabricated Metal Products.

Supplier Deliveries

%Slower

%Same

%Faster

Net

Index

Jul 2022

21.4

67.6

11.0

+10.4

55.2

Jun 2022

27.4

59.8

12.8

+14.6

57.3

May 2022

37.1

57.2

5.7

+31.4

65.7

Apr 2022

38.7

57.0

4.3

+34.4

67.2

InventoriesThe Inventories Index registered 57.3 percent in July, 1.3 percentage points higher than the 56 percent reported for June. “Manufacturing inventories expanded at a faster rate compared to June, registering their highest level since July 1984, when the index registered 57.8 percent. Of the six big manufacturing industries, five (Computer & Electronic Products; Petroleum & Coal Products; Machinery; Transportation Equipment; and Chemical Products) grew their inventories of manufacturing raw materials in July. Companies are showing the most concern about their inventory levels since the start of the pandemic in 2020, when a slowing of the manufacturing economy was anticipated,” says Fiore. An Inventories Index greater than 44.4 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

Of 18 manufacturing industries, the 13 reporting higher inventories in July — in the following order — are: Apparel, Leather & Allied Products; Textile Mills; Computer & Electronic Products; Nonmetallic Mineral Products; Printing & Related Support Activities; Electrical Equipment, Appliances & Components; Wood Products; Petroleum & Coal Products; Machinery; Plastics & Rubber Products; Transportation Equipment; Fabricated Metal Products; and Chemical Products. The three industries reporting contracting inventories in July are: Paper Products; Primary Metals; and Food, Beverage & Tobacco Products.

Inventories

%Higher

%Same

%Lower

Net

Index

Jul 2022

25.5

61.8

12.7

+12.8

57.3

Jun 2022

25.4

59.8

14.8

+10.6

56.0

May 2022

24.3

62.5

13.2

+11.1

55.9

Apr 2022

21.4

61.4

17.2

+4.2

51.6

Customers’ InventoriesISM®‘s Customers’ Inventories Index registered 39.5 percent in July, 4.3 percentage points higher than the 35.2 percent reported for June, indicating that customers’ inventory levels were considered too low. “Customers’ inventories are too low for the 70th consecutive month, a positive for future production growth, but customer inventory requirements are easing compared to previous months,” says Fiore.

Three industries (Wood Products; Food, Beverage & Tobacco Products; and Chemical Products) reported customers’ inventories as too high in July. The 12 industries reporting customers’ inventories as too low — listed in order — are: Nonmetallic Mineral Products; Transportation Equipment; Miscellaneous Manufacturing; Petroleum & Coal Products; Furniture & Related Products; Primary Metals; Plastics & Rubber Products; Computer & Electronic Products; Machinery; Paper Products; Fabricated Metal Products; and Electrical Equipment, Appliances & Components.

Customers’

Inventories

%

Reporting

%Too

High

%About

Right

%Too

Low

Net

Index

Jul 2022

78

12.4

54.2

33.4

-21.0

39.5

Jun 2022

75

11.1

48.1

40.8

-29.7

35.2

May 2022

75

12.8

39.7

47.5

-34.7

32.7

Apr 2022

76

10.5

53.2

36.3

-25.8

37.1

Prices The ISM® Prices Index registered 60 percent in July, 18.5 percentage points lower compared to the June reading of 78.5 percent, indicating raw materials prices increased for the 26th consecutive month, at a much slower rate. The Prices Index has been at or above 60 percent for 23 straight months. The month-over-month decline of 18.5 percentage points is the fourth biggest decline on record (since 1948) and the steepest since a 22.1-percentage point drop in June 2010. “The slowing in price increases is being driven by (1) volatility in the energy markets, (2) softening in the copper, steel, aluminum and corrugate markets and (3) a significant decrease in chemical demand. Notably, 21.5 percent of respondents reported paying lower prices in July, compared to 8.3 percent in June,” says Fiore. A Prices Index above 52.6 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

In July, 12 of 18 industries reported paying increased prices for raw materials, in the following order: Nonmetallic Mineral Products; Printing & Related Support Activities; Paper Products; Plastics & Rubber Products; Textile Mills; Computer & Electronic Products; Food, Beverage & Tobacco Products; Chemical Products; Miscellaneous Manufacturing; Machinery; Furniture & Related Products; and Transportation Equipment. The three industries reporting paying decreased prices for raw materials July are: Petroleum & Coal Products; Fabricated Metal Products; and Wood Products.

Prices

%Higher

%Same

%Lower

Net

Index

Jul 2022

41.5

37.0

21.5

+20.0

60.0

Jun 2022

65.2

26.5

8.3

+56.9

78.5

May 2022

70.2

24.2

5.6

+64.6

82.2

Apr 2022

73.5

22.1

4.4

+69.1

84.6

Backlog of OrdersISM®‘s Backlog of Orders Index registered 51.3 percent in July, a 1.9-percentage point decrease compared to the 53.2 percent reported in June, indicating order backlogs expanded for the 25th straight month. Of the six largest manufacturing sectors, three — Petroleum & Coal Products; Machinery; and Transportation Equipment — expanded their order backlogs. “Backlogs expanded in July at a slower rate, as new order levels remain low and panelists’ customers prepare for a slowing in general manufacturing activity. A slowing in price increases is a positive for future new orders growth and backlogs expansion,” says Fiore.

Five industries reported growth in order backlogs in July: Nonmetallic Mineral Products; Petroleum & Coal Products; Printing & Related Support Activities; Machinery; and Transportation Equipment. The seven industries reporting lower backlogs in July — in the following order — are: Furniture & Related Products; Wood Products; Fabricated Metal Products; Chemical Products; Primary Metals; Computer & Electronic Products; and Miscellaneous Manufacturing. Six industries reported no change in backlogs of orders in July as compared to June.

Backlog of

Orders

%Reporting

%Higher

%Same

%Lower

  Net

Index

Jul 2022

92

26.6

49.4

24.0

+2.6

51.3

Jun 2022

93

25.6

55.3

19.1

+6.5

53.2

May 2022

91

31.6

54.3

14.1

+17.5

58.7

Apr 2022

92

27.9

56.3

15.8

+12.1

56.0

New Export OrdersISM®‘s New Export Orders Index registered 52.6 percent in July, 1.9 percentage points above the June reading of 50.7 percent. “The New Export Orders Index grew for the 25th consecutive month, at a faster rate in July. Gains were achieved in the month as the European economy stabilizes and China recovers from its recent COVID-19 lockdowns. Of the six big industry sectors, four — Petroleum & Coal Products; Food, Beverage & Tobacco Products; Transportation Equipment; and Computer & Electronic Products — expanded,” says Fiore.

The four industries reporting growth in new export orders in July are: Petroleum & Coal Products; Food, Beverage & Tobacco Products; Transportation Equipment; and Computer & Electronic Products. The six industries reporting a decrease in new export orders in July — in the following order — are: Wood Products; Paper Products; Plastics & Rubber Products; Electrical Equipment, Appliances & Components; Miscellaneous Manufacturing; and Chemical Products. Seven industries reported no change in exports in July as compared to June.

New Export

Orders

%

Reporting

%Higher

%Same

%Lower

  Net

Index

Jul 2022

73

16.6

72.1

11.3

+5.3

52.6

Jun 2022

72

12.3

76.8

10.9

+1.4

50.7

May 2022

73

14.6

76.6

8.8

+5.8

52.9

Apr 2022

73

10.7

84.1

5.2

+5.5

52.7

ImportsISM®‘s Imports Index registered 54.4 percent in July, an increase of 3.7 percentage points compared to June’s figure of 50.7 percent. “Imports grew in July; activity improved as Asia ports started to clear their backlogs. The index reached its highest level since February (55.4 percent),” says Fiore.

The 10 industries reporting growth in imports in July — in the following order — are: Textile Mills; Printing & Related Support Activities; Petroleum & Coal Products; Primary Metals; Electrical Equipment, Appliances & Components; Transportation Equipment; Computer & Electronic Products; Fabricated Metal Products; Plastics & Rubber Products; and Machinery. Three industries reported lower volumes of imports in July: Paper Products; Miscellaneous Manufacturing; and Chemical Products.

Imports

%

Reporting

%Higher

%Same

%Lower

  Net

Index

Jul 2022

85

19.6

69.5

10.9

+8.7

54.4

Jun 2022

84

14.4

72.5

13.1

+1.3

50.7

May 2022

85

13.4

70.6

16.0

-2.6

48.7

Apr 2022

83

13.2

76.5

10.3

+2.9

51.4

The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying PolicyThe average commitment lead time for Capital Expenditures in July was 183 days, a decrease of three days compared to June. Average lead time in July for Production Materials remained at its all-time high of 100 days. Average lead time for Maintenance, Repair and Operating (MRO) Supplies increased by seven days, to an all-time high of 51 days. (ISM® began tracking lead times data in 1987.)

Percent Reporting

Capital Expenditures

Hand-to-

Mouth

30 Days

60 Days

90 Days

6 Months

1 Year+

Average

Days

Jul 2022

14

3

10

13

29

31

183

Jun 2022

15

6

7

9

31

32

186

May 2022

17

5

8

10

30

30

178

Apr 2022

18

4

6

14

30

28

173

Percent Reporting

Production Materials

Hand-to-

Mouth

30 Days

60 Days

90 Days

6 Months

1 Year+

Average

Days

Jul 2022

8

21

21

28

13

9

100

Jun 2022

8

19

23

25

18

7

100

May 2022

9

21

21

26

15

8

99

Apr 2022

9

16

26

24

18

7

100

Percent Reporting

MRO Supplies

Hand-to-

Mouth

30 Days

60 Days

90 Days

6 Months

1 Year+

Average

Days

Jul 2022

22

36

21

15

5

1

51

Jun 2022

25

39

19

12

5

44

May 2022

27

35

19

12

6

1

48

Apr 2022

24

33

23

15

4

1

49

About This ReportDO NOT CONFUSE THIS NATIONAL REPORT with the various regional purchasing reports released across the country. The national report’s information reflects the entire U.S., while the regional reports contain primarily regional data from their local vicinities. Also, the information in the regional reports is not used in calculating the results of the national report. The information compiled in this report is for the month of July 2022.

The data presented herein is obtained from a survey of manufacturing supply executives based on information they have collected within their respective organizations. ISM® makes no representation, other than that stated within this release, regarding the individual company data collection procedures. The data should be compared to all other economic data sources when used in decision-making.

Data and Method of PresentationThe Manufacturing ISM® Report On Business® is based on data compiled from purchasing and supply executives nationwide. The composition of the Manufacturing Business Survey Committee is stratified according to the North American Industry Classification System (NAICS) and each of the following NAICS-based industry’s contribution to gross domestic product (GDP): Food, Beverage & Tobacco Products; Textile Mills; Apparel, Leather & Allied Products; Wood Products; Paper Products; Printing & Related Support Activities; Petroleum & Coal Products; Chemical Products; Plastics & Rubber Products; Nonmetallic Mineral Products; Primary Metals; Fabricated Metal Products; Machinery; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Transportation Equipment; Furniture & Related Products; and Miscellaneous Manufacturing (products such as medical equipment and supplies, jewelry, sporting goods, toys and office supplies). The data are weighted based on each industry’s contribution to GDP. According to the BEA estimates for 2020 GDP (released December 22, 2021), the six largest manufacturing subsectors are: Computer & Electronic Products; Chemical Products; Transportation Equipment; Petroleum & Coal Products; Food, Beverage & Tobacco Products; and Machinery. Beginning in February 2018 with January 2018 data, computation of the indexes is accomplished utilizing unrounded numbers.

Survey responses reflect the change, if any, in the current month compared to the previous month. For each of the indicators measured (New Orders, Backlog of Orders, New Export Orders, Imports, Production, Supplier Deliveries, Inventories, Customers’ Inventories, Employment and Prices), this report shows the percentage reporting each response, the net difference between the number of responses in the positive economic direction (higher, better and slower for Supplier Deliveries) and the negative economic direction (lower, worse and faster for Supplier Deliveries), and the diffusion index. Responses are raw data and are never changed. The diffusion index includes the percent of positive responses plus one-half of those responding the same (considered positive).

The resulting single index number for those meeting the criteria for seasonal adjustments (Manufacturing PMI®, New Orders, Production, Employment and Inventories) is then seasonally adjusted to allow for the effects of repetitive intra-year variations resulting primarily from normal differences in weather conditions, various institutional arrangements, and differences attributable to non-moveable holidays. All seasonal adjustment factors are subject annually to relatively minor changes when conditions warrant them. The Manufacturing PMI® is a composite index based on the diffusion indexes of five of the indexes with equal weights: New Orders (seasonally adjusted), Production (seasonally adjusted), Employment (seasonally adjusted), Supplier Deliveries, and Inventories (seasonally adjusted).

Diffusion indexes have the properties of leading indicators and are convenient summary measures showing the prevailing direction of change and the scope of change. A Manufacturing PMI® reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally declining. A Manufacturing PMI® above 48.7 percent, over a period of time, indicates that the overall economy, or gross domestic product (GDP), is generally expanding; below 48.7 percent, it is generally declining. The distance from 50 percent or 48.7 percent is indicative of the extent of the expansion or decline. With some of the indicators within this report, ISM® has indicated the departure point between expansion and decline of comparable government series, as determined by regression analysis. The Manufacturing ISM® Report On Business® survey is sent out to Manufacturing Business Survey Committee respondents the first part of each month. Respondents are asked to report on information for the current month for U.S. operations only. ISM® receives survey responses throughout most of any given month, with the majority of respondents generally waiting until late in the month to submit responses to give the most accurate picture of current business activity. ISM® then compiles the report for release on the first business day of the following month.

The industries reporting growth, as indicated in the Manufacturing ISM® Report On Business® monthly report, are listed in the order of most growth to least growth. For the industries reporting contraction or decreases, those are listed in the order of the highest level of contraction/decrease to the least level of contraction/decrease.

Responses to Buying Policy reflect the percent reporting the current month’s lead time, the approximate weighted number of days ahead for which commitments are made for Capital Expenditures; Production Materials; and Maintenance, Repair and Operating (MRO) Supplies, expressed as hand-to-mouth (five days), 30 days, 60 days, 90 days, six months (180 days), a year or more (360 days), and the weighted average number of days. These responses are raw data, never revised, and not seasonally adjusted.

ISM ROB ContentThe Institute for Supply Management® (“ISM”) Report On Business® (both Manufacturing and Non-Manufacturing) (“ISM ROB”) contains information, text, files, images, video, sounds, musical works, works of authorship, applications, and any other materials or content (collectively, “Content”) of ISM (“ISM ROB Content”). ISM ROB Content is protected by copyright, trademark, trade secret, and other laws, and as between you and ISM, ISM owns and retains all rights in the ISM ROB Content. ISM hereby grants you a limited, revocable, nonsublicensable license to access and display on your individual device the ISM ROB Content (excluding any software code) solely for your personal, non-commercial use. The ISM ROB Content shall also contain Content of users and other ISM licensors. Except as provided herein or as explicitly allowed in writing by ISM, you shall not copy, download, stream, capture, reproduce, duplicate, archive, upload, modify, translate, publish, broadcast, transmit, retransmit, distribute, perform, display, sell, or otherwise use any ISM ROB Content.

Except as explicitly and expressly permitted by ISM, you are strictly prohibited from creating works or materials (including but not limited to tables, charts, data streams, time-series variables, fonts, icons, link buttons, wallpaper, desktop themes, online postcards, montages, mashups and similar videos, greeting cards, and unlicensed merchandise) that derive from or are based on the ISM ROB Content. This prohibition applies regardless of whether the derivative works or materials are sold, bartered, or given away. You shall not either directly or through the use of any device, software, internet site, web-based service, or other means remove, alter, bypass, avoid, interfere with, or circumvent any copyright, trademark, or other proprietary notices marked on the Content or any digital rights management mechanism, device, or other content protection or access control measure associated with the Content including geo-filtering mechanisms. Without prior written authorization from ISM, you shall not build a business utilizing the Content, whether or not for profit.

You shall not create, recreate, distribute, incorporate in other work, or advertise an index of any portion of the Content unless you receive prior written authorization from ISM. Requests for permission to reproduce or distribute ISM ROB Content can be made by contacting in writing at: ISM Research, Institute for Supply Management, 309 West Elliot Road, Suite 113, Tempe, Arizona 85284-1556, or by emailing kcahill@ismworld.org. Subject: Content Request.

ISM shall not have any liability, duty, or obligation for or relating to the ISM ROB Content or other information contained herein, any errors, inaccuracies, omissions or delays in providing any ISM ROB Content, or for any actions taken in reliance thereon. In no event shall ISM be liable for any special, incidental, or consequential damages, arising out of the use of the ISM ROB. Report On Business®, PMI®, and NMI® are registered trademarks of Institute for Supply Management®. Institute for Supply Management® and ISM® are registered trademarks of Institute for Supply Management, Inc.

About Institute for Supply Management®Institute for Supply Management® (ISM®) serves supply management professionals in more than 90 countries. Its 50,000 members around the world manage about US$1 trillion in corporate and government supply chain procurement annually. Founded in 1915 as the first supply management institute in the world, ISM is committed to advancing the practice of supply management to drive value and competitive advantage for its members, contributing to a prosperous and sustainable world. ISM leads the profession through the ISM® Report On Business®, its highly regarded certification programs and the ISM® Advance Digital Platform. This report has been issued by the association since 1931, except for a four-year interruption during World War II.

The full text version of the Manufacturing ISM® Report On Business® is posted on ISM®‘s website at www.ismrob.org on the first business day* of every month after 10:00 a.m. ET.

The next Manufacturing ISM® Report On Business® featuring August 2022 data will be released at 10:00 a.m. ET on Thursday, September 1, 2022.

*Unless the New York Stock Exchange is closed.

Contact:    

Kristina Cahill

 

Report On Business® Analyst

 

ISM®, ROB/Research Manager

 

Tempe, Arizona

 

+1 480.455.5910

 

Email: kcahill@ismworld.org

SOURCE Institute for Supply Management


RELATED CONTENT: 

Manufacturing PMI® at 53%; June 2022 Manufacturing ISM® Report On Business®

IN THE NEWS with Fastener News Desk the Week of August 1st, 2022

Read more...
fastener-pop-quiz:-metric-fasteners

Fastener Pop Quiz: Metric Fasteners

[SPONSOR]

EUROLINK FASTENER SUPPLY & SERVICE “Hard-to-Find Metric Fasteners Delivered”

Q: What are the names of screw thread types for metric self-drilling tapping screws?

A: WATCH VIDEO NOW TO FIND OUT THE CORRECT ANSWER

Eurolink is the premier US #distributor of #metricfasteners and fastener lines with hard-to-find metric #fasteners manufactured to both DIN and ISO standards. As the nation’s leading source for hard-to-find #metric fasteners, Eurolink offers access to more than 100,000 quality C-class parts from countries such as Germany, Italy, Switzerland, Poland, Spain, France, and Great Britain. Regardless of your required size, material, or finish, #EurolinkFSS has the European resources to meet your demands.

If you’re looking for a top fastener supplier you’ve found one!

Eurolink is committed to providing you fast HASSLE-FREE ordering, fair pricing, and timely delivery. Are you spending hours searching fastener websites or catalogs? Waiting on hold while a sales rep digs through their catalog to confirm a DIN number? Wondering if your invoice will even be processed correctly? How about worrying whether or not your quoted ship date was just a sales rep’s guess? Not at Eurolink Fastener ! Simply submit a quick RFQ for the items you require. We’ll do all the research, and follow up with you personally with a complete quotation. As you order products from Eurolink, you can do so with the confidence that your order will be processed accurately and efficiently — along with the best available pricing and delivery — means HASSLE-FREE to you.

Upcoming Sea Freight Order Deadlines: August 19th, 2022

*** Please have all orders delivered to Eurolink sales team by 4:00 PM EST on the deadline dates above to have your order added to the consolidated sea freight shipment.

CONTACT EUROLINK TODAY: https://eurolinkfss.com/


RELATED CONTENT:

Fastener Pop Quiz: Metric Fasteners

Fastener Pop Quiz: METRIC FASTENERS

Fastener Pop Quiz: METRIC FASTENERS

Fastener Pop Quiz

Read more...
lindfast-group-acquires-star-stainless-screw-co.

LindFast Group Acquires Star Stainless Screw Co.

July 28, 2022

FOR IMMEDIATE RELEASE:

From the office of the President, Star Stainless Screw Company

LindFast Solutions Group (LSG), a leading master distributor of specialty fasteners in North America, today announced the completion of its purchase of Star Stainless Screw Company (Star). Together LSG and Star will be even more effective at meeting the needs of their diverse customer base, ranging from stainless to inch, to metric, to value-added services, and more. “We believe the combination of LSG and Star will give our collective customers unparalleled ability to meet all of their fastener needs with one company,” said LindFast CEO Bill Niketas. “With Star’s 14 branches and distribution centers across North America and the 16 locations we have, this collective footprint will allow our customers to access product even more efficiently than in the past.”

As with other recent acquisitions by LindFast, little change is expected in the near term from a customer perspective. LSG’s goal is to maintain the exceptional Star brand name in the market. For the foreseeable future, Star will continue to operate out of its existing facilities, will remain on the same ERP system, and will extend the same policies currently in place. LSG is pleased to welcome Star Stainless to the LindFast team, confident that this combination will be a powerful force to better serve all customers involved.

About LindFast Solutions Group

Headquartered in Blaine, MN, LindFast is a master distributor of specialty fasteners in the North American market serving a broad base of national, regional, and local distribution customers through its metric (Lindstrom) and imperial (Stelfast) product brands.

As a master distributor, LindFast provides an important link in the fastener supply chain by offering a deep inventory as a “virtual warehouse” of approximately 130,000 low volume, slow moving SKUs that distribution customers need quickly but are non-economical to inventory and source ourselves. These SKUs represent high‐touch, specialty products that can be difficult to source due to their unique length, diameter, thread pitch, metal choice, or finish.

In addition to our unique product offering and virtual warehouse services, LindFast provides our distribution customers a range of value‐added services such as break bulk, packaging, kitting, plating, coating, and guaranteed stock programs, among others.

LindFast Solutions Group

2950 100th Court NE

Blaine, MN 5544

For More Information Contact: 

Tim Roberto (510)500-9925

trobertojr@starstainless.com

Star Stainless Screw Co.-Catalog-REV


RELATED CONTENT:


LindFast Group Announces Acquisition of Solution Industries

Harbour Group’s Lindstrom Acquires Stelfast

Best Booth Awards: An Interview with Lindstrom

Acquisitions, Fasteners

Read more...
fastener-pop-quiz:-metric-fasteners

Fastener Pop Quiz: Metric Fasteners

[SPONSOR]

EUROLINK FASTENER SUPPLY & SERVICE “Hard-to-Find Metric Fasteners Delivered”

Q: What size metric bolts are included in A325M and A490M standards?

WATCH VIDEO NOW TO FIND OUT THE CORRECT ANSWER

Eurolink is the premier US distributor of metric fasteners and fastener lines with hard-to-find metric fasteners manufactured to both DIN and ISO standards. As the nation’s leading source for hard-to-find #metric fasteners, Eurolink offers access to more than 100,000 quality C-class parts from countries such as Germany, Italy, Switzerland, Poland, Spain, France, and Great Britain. Regardless of your required size, material, or finish, #EurolinkFSS has the European resources to meet your demands.

If you’re looking for a top fastener supplier you’ve found one!

Eurolink is committed to providing you fast HASSLE-FREE ordering, fair pricing, and timely delivery. Are you spending hours searching fastener websites or catalogs? Waiting on hold while a sales rep digs through their catalog to confirm a DIN number? Wondering if your invoice will even be processed correctly? How about worrying whether or not your quoted ship date was just a sales rep’s guess? Not at Eurolink Fastener ! Simply submit a quick RFQ for the items you require. We’ll do all the research, and follow up with you personally with a complete quotation. As you order products from Eurolink, you can do so with the confidence that your order will be processed accurately and efficiently — along with the best available pricing and delivery — means HASSLE-FREE to you.

Upcoming Sea Freight Order Deadlines: August 19th, 2022

*** Please have all orders delivered to Eurolink sales team by 4:00 PM EST on the deadline dates above to have your order added to the consolidated sea freight shipment.

CONTACT EUROLINK TODAY: https://eurolinkfss.com/


TEST YOUR METRIC FASTENER KNOWLEDGE EVEN MORE WITH THE FOLLOWING VIDEOS:

Fastener Pop Quiz: METRIC FASTENERS

Fastener Pop Quiz: METRIC FASTENERS

Fastener Pop Quiz: Metric Fasteners

Fastener Pop Quiz, Featured

Read more...
in-the-news-with-fastener-news-desk-the-week-of-july-25th,-2022

IN THE NEWS with Fastener News Desk the Week of July 25th, 2022

I’m Lisa Kleinhandler, Editor-in-Chief at Fastener News Desk

Watch Now on FastenerTV at YouTube: (8:18)

In Fastener News…

Insulated Metal Panel (IMP) Manufacturer | Metl-Span

A New Patent-Pending Concealed Fastener Clip from Metl-Span Increases Strength & Durability of Building Facades. Metl-Span, a Nucor Company and recognized leader in the advancement of insulated metal panel technology, is expanding its lineup of clips for concealed #fasteners with the introduction of the patent-pending V6 X-Span Clip.


In Manufacturing News… 📌 Save the Date: The countdown to ManufacturingDay! MFG Day 2022 is Friday October 7th! MFG Day is manufacturing’s biggest annual opportunity to inspire the next generation to start careers in modern manufacturing through a series of focused events to promote manufacturing to students, parents and educators. Plan to open your doors Oct. 7 or throughout the month of October! Get a resource guide and all you need to get started planning your Manufacturing Day event at https://creatorswanted.org/ Get in the conversation using #MFGDay22


Join the International Fastener Movement at the 2022 International Fastener Expo! #IFE2022 is your opportunity to connect with industry leading suppliers & peers during this 3-day event!

REGISTRATION IS OPEN for the 41st edition of the International Fastener Expo which will take place in Las Vegas, NV October 17-19th. The IFE is Largest B2B expo of Industrial Fasteners and Tooling & Machinery in North America. Since 1981, the event continues to bring together the manufacturers and master distributors of fasteners and other related products and services with distributors and sales agents in the entire supply and distribution chain.

IFE Exhibitors! With more than 300 companies already registered, space is running out to exhibit at this year’s expo. Don’t miss your opportunity to make an impact at the largest B2B expo for #fasteners, tooling & machinery!

This year’s expo is going to be bigger and better than ever and FND will be looking forward to awarding the 2022 Best Booth winners! The overall BEST BOOTH will be awarded a first ever Ultimate Championship Customized Belt. You’re going to want to WIN the belt and the bragging rights for years!

Book your space today! https://fastenershows.com 

TO REGISTER USE FND’s Discount Code: FND50


In Fastener Event News …

Image

Tue. July 26th Webinar: Testing Fasteners. Explore the assortment of test choices for fasteners hosted by the industrial fastener institute & The fastener training institute 🔩✏️ Register for the Webinar at FastenerTraining.org.


Join the North Coast Fastener Association for their Night at the Ballpark networking event on Thursday, August 4th at Progressive Field to watch the Cleveland Guardians battle the Houston Astros. For more info go to NCFAonline.com


Image

Wed,. August 10th Join the NFDA and YFP for a panel discussing the next generation of fastener professionals. What’s Working Best for the Younger Generations? The panelists will dive into best practices for managing, motivating, and interacting with young employees and colleagues. To Register go to: NFDA-Fastener.org


Image

Register at NFDA-Fastener.org The Midwest Fastener Association’s FSTNR WEEK is coming up next month! Save the dates: August 21-26th for a great week of events! 👉 Registration and more info: http://MWFA.net

Image

The FTI’s Fastener Training Week is scheduled for August 22-26 in Chicago. The advanced technical training program is offered in partnership with Industrial Fastener Institute and is for fastener distributors, manufacturers, and end-users. Fastener Training Week offers five intensive days of education and plant tours as part of the FTI Certified Fastener Specialist™ (CFS) advanced technical training program. Attendees will be eligible for the Certified Fastener Specialist™ (CFS) designation. Early-bird registration available until August 1st. Go to FastenerTraining.org


Image

IFE Exhibitors and attendees REGISTRATION IS NOW OPEN FOR FTI “How Fasteners are Made and What Drives the Cost of a Fastener” CLASS. For Registration and more info go to: https://fastenershows.com/fti-class/


🏆 for the past 40 years the International Fastener Expo Fastener Hall of Fame has recognized professionals who have made significant and enduring contributions to the fastener industry. Who do you think should be honored with this prestigious award this year? To nominate go to FastenerShows.com. The deadline to submit nominations is July 30th.


Industrial products are comprehensive and purchasing them online can lead to poor customer experiences when utilizing faceted search. Product Genius Technology’s grid technology allows clients to search, sort and purchase 100’s of products from a one-page buying experience. Experience FAST Fastener buying at 1-800-Fasteners.com. PGT’s services also include, data cleaning and preparation, consulting, and strategizing. Contact ProductGeniusTechnology.com or call 1-800-fasteners to find out how to get started today.


If you would like to share your company’s events, news or sponsor an upcoming episode of IN THE NEWS or would like to add to the Fastener Museum me: lisa@fastenernewsdesk.com.

Thanks for tuning in to this week’s episode of IN THE NEWS with Fastener News Desk.

Until next week, be well, be safe and Keep it Fastenating.


Tags:

FastenerExpo FastenerNews Fasteners COVID SupplyChain Taiwan distribution fastenernews fasteners distribution industrial $FAST fastenernews fasteners workforce training FSTNRweek leadership 


RELATED CONTENT:

IN THE NEWS with Fastener News Desk the Week of July 18th, 2022

IN THE NEWS with Fastener News Desk the Week of July 11th, 2022

Fastener TV

Read more...
in-the-news-with-fastener-news-desk-the-week-of-july-18th,-2022

IN THE NEWS with Fastener News Desk the Week of July 18th, 2022

I’m Lisa Kleinhandler, Editor-in-Chief at Fastener News Desk

It’s IN THE NEWS the Week of July 18th, 2022


In Fastener News…

The Würth Group, world market leader in the manufacture and sale of assembly and fastening materials, was able to carry the growth momentum from their 2021 fiscal year into the first half of 2022 in spite of the unstable economic situation.

The Wurth Group recorded sales of EUR 9.9 billion in the first six months, corresponding to an increase of 18.4 percent compared to the same period of the previous year and of 17 percent adjusted for currency effects.


Image

One of North America’s top 100 automotive suppliers opens a cutting-edge manufacturing facility. MacLean-Fogg Company, is a leading supplier of fastener solutions, engineered solutions, plastic solutions and additive solutions for automotive, heavy vehicle, military and other industrial markets. MacLean-Fogg Announces the Grand Opening of their new Additive Manufacturing Operation. This new facility will be focused on the production of 3D printed components and tooling, as well as the distribution of MacLean Additive’s award winning “Formetrix L-40” steel powder for tooling applications.


In Fastener Technology News….

Digital Commerce 360 reports that The road to success in B2B marketplace development can be a long one and the journey along the way maybe full of twists and turns and even dead ends. Bay Supply Co. is a prime example of a company dealing with – and overcoming – the challenges of building a lasting B2B marketplace. Bay Supply, an industrial distributor based in Farmingdale, New York, has been selling a wide array of fasteners to big and small companies since 1961. In December, it rolled out a new marketplace on BaySupply.com. It brings together buyers and sellers in what the company calls a disparate industry.

About Bay Supply & Platform Services - Help Center & FAQs

In less than a year of operation, Bay Supply’s B2B marketplace has attracted about 50,000 buyers to its inventory of nearly 180,000 fastener products. Its products range from rivets, lock bolts and blind bolts to blind sealing plugs, rivet nuts, helical inserts, and key locking inserts.

Bay Supply chief operating officer says “We are onboarding about one or two sellers each week”


Join the International Fastener Movement at the 2022 International Fastener Expo! #IFE2022 is your opportunity to connect with industry leading suppliers & peers during this 3-day event! Save 50% off registration with FND Discount Code: FND50 Register NOW: bit.ly/3yWJVCY

REGISTRATION IS OPEN for the 41st edition of the International Fastener Expo which will take place in Las Vegas, NV October 17-19th. The IFE is Largest B2B expo of Industrial Fasteners and Tooling & Machinery in North America. Since 1981, the event continues to bring together the manufacturers and master distributors of fasteners and other related products and services with distributors and sales agents in the entire supply and distribution chain.

IFE Exhibitors! With more than 300 companies already registered, space is running out to exhibit at this year’s expo. Don’t miss your opportunity to make an impact at the largest B2B expo for #fasteners, tooling & machinery!

This year’s expo is going to be bigger and better than ever and FND will be looking forward to awarding the 2022 Best Booth winners! The overall BEST BOOTH will be awarded a first ever Ultimate Championship Customized Belt. You’re going to want to WIN the belt and the bragging rights for years!

Book your space today! https://fastenershows.com 

GET REGISTERED today! USE FND’s Discount Code: FND50 and SAVE 50% off registration. Click Here:


FND GOES TRIPLE D AT IFE 2022 by Cris Young FND’s Editor-at-Large and foodie has compiled a list of ‘Diners, Drive-ins and Dives Las Vegas favorites including one from Guy Fieri himself. If you’re planning to be at the International Fastener Expo you might want to keep this list handy!


In Fastener Event News …

Southwestern Fastener Association

SFA Happy Hour

Tulsa, OK

The Southwestern Fastener Association is having their HAPPY HOUR networking event in TULSA, OK JULY 21 @ 5:30 PM – 8:30 PM For more info go to https://www.sfa-fastener.org


FTI- Testing Fasteners

FTI- Testing Fasteners

The Fastener Training Institute has a NEW webinar: Testing Fasteners which will be happening on Tuesday, July 26 11 a.m. to 1 p.m. CST. The two-hour technical webinar will explore the assortment of test choices for fasteners. Participants will learn about some of the key tests, hardness, tensile strength, shear strength and corrosion, that every fastener manufacturer or supplier should be familiar with. Get more info and register at FastenerTraining.org


Image

Save the dates: August 21-26th for the Midwest Fastener Association’s FSTNR WEEK! Get involved in a Charity Bed Building Event that benefits the Sleep in Heavenly Peace Organization, plus A Fastener seminar, golf outing and lots more! 👉 Registration and more info: http://MWFA.net


The Fastener Training Institute

The Fastener Training Institute’s Fastener Training Week in-person training class is scheduled for August 22-26 in Chicago. The advanced technical training program is offered in partnership with Industrial Fastener Institute and is for fastener distributors, manufacturers, and end-users.

Fastener Training Week, hosted by the Mid-West Fastener Association, offers five intensive days of education and plant tours as part of the FTI Certified Fastener Specialist™ (CFS) advanced technical training program. Attendees will be eligible for the Certified Fastener Specialist™ (CFS) designation.


Image

REGISTRATION IS NOW OPEN FOR FTI “How Fasteners are Made and What Drives the Cost of a Fastener CLASS at IFE2022. For Registration and more info go to: https://fastenershows.com/fti-class/


🏆 for the past 40 years the International Fastener Expo Fastener Hall of Fame has recognized professionals who have made significant and enduring contributions to the fastener industry. Who do you think should be honored with this prestigious award this year? To nominate go to FastenerShows.com. The deadline to submit nominations is July 30th.


The stories we featured in this week’s episode of IN THE NEWS can be found at Fastener News Desk or in our Twitter feed @FastenerNews and on LinkedIn in the Fastener News Group!


Give your clients an outstanding customer experience that keeps them coming back every time…with the best user experience for buying industrial products online. Product Genius Technology grid technology allows clients to search, sort and buy 100’s of products from a one-page buying experience.  PGT’s services also include, data cleaning and preparation, consulting, and strategizing. Contact ProductGeniusTechnology.com or call 1-800-fasteners to find out how to get started today.


If you would like to share your company’s events, news or sponsor an upcoming episode of IN THE NEWS or would like to add to the Fastener Museum me: lisa@fastenernewsdesk.com.

Thanks for tuning in to this week’s episode of IN THE NEWS with Fastener News Desk.

Until next week, be well, be safe and Keep it Fastenating.


Tags:

FastenerExpo FastenerNews Fasteners COVID SupplyChain Taiwan distribution fastenernews fasteners distribution industrial $FAST fastenernews fasteners workforce training FSTNRweek leadership 


IN THE NEWS with Fastener News Desk the Week of July 11th, 2022

IN THE NEWS with Fastener News Desk the Week of July 4th, 2022

Fastener TV

Read more...
scanwell-–-july-supply-chain-issues

Scanwell – July Supply Chain Issues

The latest news in the ocean, air, rail, and trucking industries.

Provided by Chris Donnell

Ocean Carriers, Freight Rates and Ports:  

Everyone;

I wanted to send out a quick note about the current state of the global supply chain as there are a lot of things happening which can / will affect how cargo moves throughout this amazing country.

Ocean Freight / Ports:

  • Ocean rates have dropped significantly over the past month and a half. While the rates are still high compared to those pre-covid, they have dropped in excess of 50% or more depending on where your shipping from and to. This should continue to at least mid-August.  
  • As of today, the negotiations between the ILWU and PMA are still on-going even though the contract officially expired on June 30th. There hasn’t been any announced work slow downs and I’m hearing the talks are progressing. Let’s all cross our fingers this works out and we don’t suffer what we all went through in 2015/16.
  • The ports along the West Coast have seen a steady decline in the amount of cargo vessels sitting idle off the coast, Los Angeles and Long Beach still are showing more than 20 vessels but that fails in comparison to what it was back in January where we saw more than 100 sitting idle.
  • As for the ports of the East Coast and Gulf, they are seeing a record number of vessels sitting idle and congestion is crippling the ports. To put things into perspective, container volumes moving through the East Coast ports are up some 56% compared to a year ago as many importers are fearful for a West Coast slowdown and diverted a lot of cargo away from the West Coast.

Air Freight / Airline Terminals:

  • Air Freight rates continue to slide as cargo demand has softened some. Unfortunately fuel costs are up and off-setting some of the reduction importers would see. This trend should continue until at least mid-August.  
  • Airline terminals are reporting a steady decline in cargo however they aren’t willing to extend free time just yet. Most are still holding strong at their 24 hour rule which makes matters difficult when trying to pull the cargo from the terminal without having to pay storage.

Rail / Intermodal:

  • Many of you have heard the news that President Biden squashed a potential strike from the Rail Unions last Friday. The strike was scheduled to start today however with his injunction and the infusion of a mediator, they now have 30 days to finalize a contract which has been expired for the past 3 years. If an agreement can’t be agreed upon by all parties in the time, a 30 day cooling off period would begin and around Mid-September the rail industry could grind to a halt due to strike. Something to keep in mind, more than 30% of all cargo moves by rail today and the shutdown would send ripple effects through the global supply chain.
  • As of today, there are more than 200,000 containers sitting at port right now that need to move by rail inland. If a strike would occur it would send congestion at ports to all-time highs, warehouse and transload facilities would just be inundated with cargo, trucking would grid to a halt as chassis’ and other equipment would be tied up and this would result in importers paying hefty demurrage and detention fees to the carriers and ocean / rail terminals.

Trucking / Drayage / Long Haul:

  • The AB5 labor law is sending nightmares throughout California as more and more truckers are concerned about their well-being. As of July 14th, California Gov. Gavin Newsome is looking into the concerns raised by the California Trucking Association and trying to help mitigate the uncertainty of this however with each passing day, more and more independent drivers are joining forces with the work slowdowns or strikes. If California proceeds with mandating AB5 in it’s current state it will effect some 70,000 truckers in California.  

We will keep you posted as this progress. Have a wonderful day.

Kind Regards,

Chris Donnell

National Sales Director

Scanwell Logistics International (CHI) Inc.

2455 Arthur Avenue

Elk Grove Village, IL 60007

Tel: 847.228.6789

Fax: 847.228.0451

Mobile: 630-532-4561

E-Mail: chrisdonnell@scanwell.com

Web: www.scanwell.com

Scanwell: The power of our innovation and imagination makes us infinite.


RELATED CONTENT:

Scanwell Monthly Logistics Report | June 2022

Scanwell Monthly Logistics Report | May 2022

Featured, Supply Chain

Read more...
fnd-goes-triple-d-at-ife-2022

FND Goes Triple D at IFE 2022

Contributed by: Cris Young | Editor-at-Large

Like just about everyone else out there, I love great food.

I consider myself to be a bit of a foodie, a regular at many local restaurants and a huge fan of the Food Networks’ show Diners, Drive Ins, and Dives.

Which got me thinking about Vegas and my upcoming trip to the in October. In the past we’ve stayed close to hotel and by close, I mean never leave. There are so many restaurants inside the hotel complex you can find just about any type of food you crave so you don’t necessarily have to go anywhere else. But what about all those other talented chefs in the rest of the city, don’t they deserve an opportunity to satisfy a hungry show attendee? So, after watching Guy Fieri tease me with mouthwatering Vegas cuisine, I thought I’d share with the rest of the industry should you get the urge to venture out to experience what the rest of Vegas has to offer.

From barbecue, pizza, burgers, to Asian and New Orleans inspired seafood get your food fantasies filled after a day at the show. Too tired to get out, then order on the mobile app and have it delivered.

Full disclosure, I have not tried any yet, but they all have a minimum of 4+ stars out of five and come recommended by the Flavortown King himself. Here’s the list:


Crepe Expectations

9500 S Eastern Ave, Las Vegas 89123

Phone: 702-583-4939

In over-the-top Sin City, even the classic crepe gets revamped in outrageous new ways, as Guy learned during a visit to this Las Vegas restaurant. “That citrus and the carne asada is fantastic,” he said of the Sonora crepe, which comes stuffed with teres major steak that’s cooked down with orange, lemon, and carne asada seasoning. Cheese, guacamole, and fire-roasted salsa complete the creation.


John Mull’s Meats and Road Kill Grill

3730 Thom Blvd., Las Vegas 89130

Phone: (702) 645-1200

Barbecue master Chuck Frommer has the best barbecue in Vegas and the locals know it. Guy fell in love with the hot links, which are cured for 16 hours and smoked for six, and savored the flavorful ribs. The pulled pork and mac ‘n’ cheese are also popular.


Those Guys Pies

2916 Lake East Dr, Las Vegas, NV 89117

Phone: 702-629-2626

Two New Jersey transplants serve classic New York pizzas and creatively topped options like a Cheesesteak Pie and the Maui Wowie, with barbecue sauce, bacon, pineapple, and pickled jalapenos.


Four Kegs Sports Pub

276 N Jones Blvd, Las Vegas 89107

Phone: (702) 870-0255

One of Guy’s favorite hangouts in college was the Four Kegs Sports Pub in Las Vegas, and to this day he swears they make the best stromboli he’s ever had. Owner Mario Perkins makes sure to keep a thin delicate crust on all of the stromboli he makes, and it’s just as good as Guy remembers it.


Fat Choy Restaurant

595 E Sahara Ave, Las Vegas, NV 89104

Phone: 702-794-3464

Chef Sheridan Su’s gamble of opening a food truck in Las Vegas in 2011 paid off big, as the crowds kept coming back for more of his Asian-American dishes. The popularity grew to the point where Chef Su now owns a restaurant, where he’s dishing up a Pork Belly Bao that Guy just had to try. The bao (or steamed bun) comes loaded with marinated pork belly, sautéed mustard greens, crushed peanuts, and cilantro.


Forte European Tapas Bar and Bistro

4180 S Rainbow Blvd, Las Vegas 89103

Phone: (702) 220-3876

While still in college, Chef Nina Manchev opened her Bulgarian restaurant at the age of 23. The mixed grill plate with three different types of Bulgarian sausage captured Guy’s heart. Topped with dry cured Bulgarian charcuterie, the Thracian Clay Pot was another one of Guy’s favorites.


Guy Fieri’s Vegas Kitchen Bar

The Linq Hotel & Casino, 3535 Las Vegas Blvd S, Las Vegas, NV 89109

Phone: 1-800-634-6441

For the ultimate in comfort food indulgence, order the Bacon Mac ‘n’ Cheese Burger at Guy’s joint in Las Vegas. This monster of a between-the-bun meal features a beef patty topped with a scoop of macaroni and cheese, a blanket of a cheese slice, strips of smoky bacon and Guy’s mayo-based sauce.


Lola’s – A Louisiana Kitchen

241 W Charleston Blvd, Las Vegas, NV 89102

Phone: (702) 227-5652

Lola’s, a New Orleans style restaurant, has brought the Big Easy to Sin City. Guy says the roast beef po’ boy with gravy is “on point.” The crawfish, according to Guy, is “tender, sweet and out of bounds.” Locals recommend the seafood gumbo, shrimp and grits and oysters.


Osaka Japanese Bistro

4205 West Sahara Ave, Las Vegas, NV 89102

Phone: 702-876-4988

Guy took a detour off the Las Vegas Strip to dig into top-rated sushi at Osaka Japanese Bistro, which has been serving its addictive rolls since 1967. “It’s dynamite,” said Guy of the Roppongi Roll, which features spicy tuna atop a layer of shrimp. The combo comes enveloped in a seaweed sheet that’s coated with rice, then topped with tuna, smelt eggs, green onions, and a mix of sweet and spicy sauces.


Naked City Pizza

3240 S Arville St, Las Vegas, NV 89102

Phone: 702-243-6277

Tucked away in a bar, this pizza place is serving up gourmet pies in a non-gourmet situation. Guy liked the rich and creamy Sicilian topped with meatballs, white garlic sauce, spinach, mozzarella, and ricotta. Crave spicy? Try the Suicide Fries served with a medley of peppers for an awesome kick.


So to my fellow foodies, and IFE attendees we wish you an outstanding and prosperous expo experience with lots of Triple D-elicious eats’ along the way!

We look forward to connecting with you in Vegas! 

One more thing before I sign off…if you haven’t already registered for the International Fastener Expo use our 50% off discount code: FND50

Save 50% off registration with FND Discount Code: FND50 Register NOW: bit.ly/3yWJVCY

SEE YOU IN VEGAS BABY!


RELATED CONTENT:

Top 5 Things-To-Do to Get Ready for IFE 2022

IFE Fastener Hall of Fame Seeking Nominations

International Fastener Expo

Read more...
wurth-group-continues-on-its-growth-track

Würth Group Continues on its Growth Track

File:Würth logo.svg - Wikipedia

Sales rose by 18.4 percent to EUR 9.9 billion in the first half of 2022

• Operating result increases to EUR 720 million

• Group has 84,494 employees

• Macroeconomic and political situation dampens expectations for the second half of the year

• Investments in the company ensure sustainability

The Würth Group, world market leader in the manufacture and sale of assembly and fastening materials, was able to carry the growth momentum from the 2021 fiscal year into the first half of 2022 in spite of the unstable economic situation.

The globally operating Group recorded sales of EUR 9.9 billion in the first six months, corresponding to an increase of 18.4 percent compared to the same period of the previous year and of 17.0 percent adjusted for currency effects.

“Supply and material bottlenecks, price increases, the COVID-19 pandemic and, since February, the conflict in Ukraine: Coping with these crises which are currently hitting the economy is very challenging for all of us. Currently, the energy crisis is coming to a head and we are all looking for alternatives, which, in turn, may be an opportunity for the transition to more sustainability. In this context, achieving such positive results is more than satisfactory. However, we are aware that we will probably not be able to maintain these high growth rates given the fact that the economy is cooling down,” says Robert Friedmann, Chairman of the Central Managing Board of the Würth Group.

Companies in Germany and abroad are growing

In Germany, the Würth Group generated sales of EUR 3.9 billion (+12.7 percent). Especially the companies operating in Germany’s Electrical Wholesale unit managed a very robust sales development. The company eiSos in Waldenburg was even able to build seamlessly on the strong year of 2021. After months of rather subdued business development, the Trade unit recovered and grew at double-digit rates. The companies abroad generated sales of EUR 6.0 billion (+22.3 percent). The companies in Spain, Italy, North America and South America were the driving force behind growth. Adolf Würth GmbH & Co. KG, the largest individual company of the Würth Group, generated sales of EUR 1.4 billion including intra-Group sales (+10.1 percent). The further expansion of multi-channel sales has paid off: E-business sales in particular grew by 21.4 percent year on year, representing 20.2 percent of total sales.

Volatile economic situation

Since the beginning of the year, the German economy has been recovering gradually from the effects of the COVID-19 pandemic of the last two and a half years, but the positive trend is being curbed severely, as the conflict in Ukraine and China’s zero-Covid strategy are driving up prices, while increased energy costs and supply bottlenecks are pushing prices even further. For the first time since the beginning of the pandemic, container ships are also jamming on the North Sea along the German, Dutch and Belgian ports. The Kiel Institute for the World Economy estimates that more than eleven percent of all goods shipped worldwide cannot be cleared at present.

“Despite the tense situation, we have the supply of materials to our customers under control. This is our top priority. The continuing customer growth shows that our customers can rely on our ability to deliver, particularly compared to our competition. Maintaining this relationship of trust is what we are focusing on,” says Mr. Friedmann.

Operating result

As of June 2022, the operating result of the Würth Group is at EUR 720 million and thus clearly up on the previous year (EUR 520 million). This positive development is above all the result of productivity increases at the large, established companies in Germany, Southern Europe and the USA.

Employees

The Würth Group acquired 1,311 new employees in the first half of 2022. Currently, 84,494 people work in the Group, 41,829 of which are active in the sales force. At the end of 2021, the Group had a total of 83,183 employees. In Germany, the Group has 25,807 employees.

Investments at headquarters ensure the Group’s future viability

The company lays the foundation for further growth by investing in its future viability. The expansion of the warehouse and logistics center at the headquarters in Künzelsau-Gaisbach, the largest logistics investment in the Group’s history, is a clear commitment of Würth to the Hohenlohe region. In addition, the company has built an innovation center at the premises of the Group headquarters to strengthen its own manufacturing expertise and innovative strength. It will be inaugurated and put into service on 28 September 2022.

“Especially in times of crisis, it is important to offer our employees security. With our investments, we are creating stability-a positive signal not only to the workforce, but also to future employees. After the experiences from the COVID-19 pandemic, this is a decisive criterion for many people,” says Mr. Friedmann.

Outlook for the second half of the year

The volatility of the current situation makes it difficult to assess how the economy will develop. Supply bottlenecks will continue to affect industry and the construction sector. The same applies to high commodity prices and the development of inflation and interest rates. The future gas supply also remains uncertain after the Federal Ministry for Economic Affairs and Climate Action declared the second stage of the gas emergency plan in Germany on June 23, 2022.

“The outlook for the second half of 2022 is certainly anything but optimal due to difficult general conditions. Nevertheless, we currently expect the company to continue its positive development with double-digit sales growth in 2022-provided the global economic and political situation does not deteriorate more dramatically,” says Mr. Friedmann.

About the Würth Group

The Würth Group is the global market leader in the development, production, and sale of fastening and assembly materials. Other trading and production companies, known as the Allied Companies, operate in related business areas, ranging from electrical wholesale and electronics to financial services. The Group employs more than 84,000 employees in over 400 companies with more than 2,500 pick-up shops across 80 countries. The Group achieved sales of EUR 17.1 billion in fiscal year 2021. With 7,500 employees, Adolf Würth GmbH & Co. KG in Künzelsau is the largest single company in the Würth Group.

Content Source: Wuerth 


RELATED CONTENT:

Würth digitalizes the trades

Würth Revcar Leases Former Home Shopping Network Building in Roanoke, VA

Fastener News, Fasteners

Read more...