Author - fluentdesigns

fastener-distributor-index-(fdi)-|-december-2023

Fastener Distributor Index (FDI) | December 2023

The Fastener Distributor Index (FDI) survey for December, 2023 retrenches below 50, climbing to 53.4 after two consecutive months of expansionary readings that left us incrementally positive on fastener market momentum, the FDI took a somewhat unexpected step back in December to 47.5.

Key Points:

FDI retrenches below 50. After two consecutive months of expansionary readings that left us incrementally positive on fastener market momentum, the FDI took a somewhat unexpected step back in December to 47.5 (from 53.4 last month). However, this could simply be normal seasonal slowing in December, as many participants suggested: “December is ALWAYS our worst month so the negative answers for month-to-month shouldn’t be taken too seriously. Our customers are mostly closed the last two weeks of the year and many of our vendors are closed the last week of the year. ” M/m deceleration in the FDI was driven by a significantly lower seasonally adjusted sales index (47.4 vs. 63.0 in November), the employment index (moderated to 50.0 from 55.9), and customer inventories (46.6 from 54.4). Just 24% of respondents indicated sales came in above seasonal expectations (November 35% and October 44%). Another 38% said sales were in line (consistent with last month), while 38% saw weaker sales than expected (November 26%).

FLI also slightly lower m/m. The FLI saw similar deceleration, coming in at 49.6 vs. 50.4 last month. Last month’s reading had marked the first growth reading for the index since July 2022. The m/m decline in December reflected softer employment levels and higher customer inventories, although the six-month outlook index did move higher off a soft month. On the outlook specifically, 55% of respondents predicted higher activity six months from now vs. today compared to 47% last month. The percentage anticipating similar activity was 31% compared to 29% in November, while the percentage expecting softer activity was just 14% (last month 24%). This drove the six-month outlook index to register 70.7 vs. 61.8 last month.

Read Full Report:

FDI_Report_December_2023



Listen to episode #196 of the Fully Threaded Radio podcast for further commentary.



FND encourages all North American fastener distributors to take part in the FDI Monthly Survey.

If you are interested in being a more active part of the fastener industry, you can apply to add your company to the FDI survey group. Complete the “Request an Invitation to Participate” form by clicking here. Once verified, you will receive login ID and password information and you will be notified by email every month when the survey period has been opened.

– Fastener News Desk


About the Fastener Distributor Index (FDI).

The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. The FDI is a monthly survey of North American fastener distributors, conducted with the FCH Sourcing Network and Baird. It offers insights into current fastener industry trends/outlooks. Similarly, the Forward-Looking Indicator (FLI) is based on a weighted average of four forward-looking inputs from the FDI survey. This indicator is designed to provide directional perspective on future expectations for fastener market conditions. As diffusion indexes, values above 50.0 signal strength, while readings below 50.0 signal weakness. Over time, results should be directly relevant to Fastenal (FAST) and broadly relevant to other industrial distributors such as W.W. Grainger (GWW) and MSC Industrial (MSM).

The FDI Survey website is a resource than can be accessed by anyone, but it can only be updated by registered users during the monthly open survey period, which occurs during the last week of each month.


RELATED CONTENT:

Fastener Distributor Index (FDI) | November 2023

Fastener Distributor Index (FDI) | October 2023

Distribution, Fastener Distributor Index, Fastener Industry, Fastener News

Read more...
in-the-news-with-fastener-news-desk-the-week-of-january-15,-2024

IN THE NEWS with Fastener News Desk the Week of January 15, 2024

Here’s the stories you need to be following in fastener industry trends, news, acquisitions, and upcoming events making headlines the week of January 15, 2024.

Watch now on FastenerTV at YouTube: (08:09)


Sherex Fastening Solutions has joined the PennEngineering® family. PennEngineering® announced the acquisition of Sherex® Fastening Solutions, a global leader in the design, manufacturing, and installation of blind rivet nuts and associated fastening solutions. Headquartered in Buffalo, New York, Sherex is a premier technical provider of blind rivet nuts, with strong application expertise, and production capabilities worldwide. 

PennEngineering® Acquires Sherex Fastening Solutions


FASTENERS MAKING HEADLINES:


Boeing has named an independent advisor to lead review of quality management practices. Kirkland H. Donald, a retired Navy admiral, has been named as the independent advisor to lead a comprehensive quality review of Boeing’s quality management system for commercial airplanes after missing bolts caused a mid-air blowout of a cabin panel on an Alaska Airlines flight.


Curation team members at NASA’s Johnson Space Center in Houston have successfully removed the two fasteners from the sampler head that had prevented the remainder of asteroid sample material from being accessed. After multiple attempts at removal, the team discovered two of the 35 fasteners on the Touch-and-Go Sample Acquisition Mechanism that holds the material collected from the asteroid could not be removed with the current tools approved for use in the O-SI-RIS-REx glovebox. Engineers on the team developed new tools that freed the fasteners on Jan. 10. Congratulations to the engineers, their perseverance paid off!


TECHNOLOGY NEWS:


NetPlus Alliance, a buying group serving the industrial supply marketplace, announced the launch of its Digital Content Hub. The new hub will serve as a data repository. That repository will offer access to product content and industrial supplies data from an array of manufacturers.

NetPlus expects the Digital Content Hub to serve as a one-stop database for distributors. In practice, its goal will be to help smaller distributors compete with larger ones. According to the company, the hub will do so by providing access to the latest industrial supply data for millions of products.


FASTENATING: CELEBRATING YOUR SUCCESS


Solon Manufacturing Company, a premier designer and manufacturer of Belleville spring washers, is celebrating their 75-year anniversary. Since its inception in 1949, Solon Manufacturing Co. has been dedicated to excellence, innovation, and customer satisfaction, and this milestone marks a momentous journey of growth and success.

Solon Manufacturing Celebrating 75 Years in Business


FASTENER INDUSTRY EVENTS:


Image

Join WIFI at the Women in the Fastener Industry Virtual Annual Members Meeting – January 16th at 2PM ET, WIFI will dive into a comprehensive review of the past year’s milestones and an exciting preview of what’s to come! They will highlight key moments and celebrate wins, as well as unveil plans, initiatives, and opportunities that promise to elevate the industry and empower women fastener industry professionals even further. Join WIFI as they reflect and set their sights on an even brighter future! Save your spot and register today at https://www.fastenerwomen.com/


Image

Have you ever wondered why aerospace manufacturers take so many precautions to supply a product that are free of imperfections? During this live webinar the importance of workmanship will be explored. Register now for Workmanship – The Impact of Imperfections and Surface Discontinuities webinar Co-Produced by Industrial Fasteners Institute and Fastener Training Institute which takes place Friday, January 26 12:00 p.m. – 2:00 p.m. EST. Go to https://fastenertrainingevents.com/workmanship.htm  for details.


Registration is now open for the Pac-West 2024 Spring Conference and Tabletop Show! The conference and Tabletop Show are scheduled for March 6 – 8 th in Anaheim, CA. The Spring Conference will feature next-level education, a tabletop show with more than 70 vendors and exciting activities including golf and an Anaheim Ducks hockey game. To register go to https://www.pac-west.org/


NFDA

NFDA Seeking Nominations for the Fastener Professional of the Year Nominations.

The award was created by NFDA to honor individuals and companies that make a substantial positive impact on people’s lives. Membership in NFDA is not a requirement to be selected for the Fastener Professional of the Year award. Self-nominations are acceptable, or nominations can be submitted by others.

Go to https://www.nfda-fastener.org/ to nominate today! The deadline to nominate someone for the 2024 award is February 12, 2024


FASTENER INDUSTRY SCHOLARSHIPS:


The Gilchrist Foundation is accepting applications for their 2024 scholarship! Providing scholarships and leadership opportunities for persons engaged in or pursuing careers in the fasteners industry. The application is available at: http://www.gilchristfoundation.com. The application is due by May 31, 2024.


The stories featured in this week’s episode of IN THE NEWS can be found at Fastener News Desk or in our feed @FastenerNews at X.com the twitter rebrand, on LinkedIn in the Fastener News Group and @FastenerNews at Threads!

 If you would like to share your company’s news or events contact me, lisa@fastenernewsdesk.com.  Thanks for tuning in to this week’s episode of ‘IN THE NEWS’ with Fastener News Desk.

Until next week, be well and keep it fastenating.

Sign up to receive the FND newsletter designed to keep busy fastener professionals like you up-to-speed on “All things FASTENATING”!

  • Subscribe to receive our weekly newsletter:
  • Join the LinkedIn Fastener News Group:
  • Join the LinkedIn Fastener News Desk page:

Fastener Training Week will be coming to Cleveland, Ohio the week of April 8, 2024. Stay tuned for more details!


RELATED CONTENT:

IN THE NEWS with Fastener News Desk the Week of January 8, 2024

Fastener Industry, Fastener News, Fastener News Desk, Fastener News Podcast, Fastener TV

Read more...
pennengineering-acquires-sherex-fastening-solutions

PennEngineering® Acquires Sherex Fastening Solutions

DANBORO, Pa.- PennEngineering® announced the acquisition of Sherex® Fastening Solutions, a global leader in the design, manufacturing, and installation of blind rivet nuts and associated fastening solutions.

“Teaming up with PennEngineering allows Sherex to provide our customers with additional global manufacturing capability to meet their demands around the world. Our long-standing customer relationships, combined with the reputation and history of PennEngineering will allow us to continue to provide enhanced value to our customers.”

Sherex-Logo-full-color - Sherex Fastening Solutions

Headquartered in Buffalo, New York, Sherex is a premier technical provider of blind rivet nuts, with strong application expertise, and production capabilities worldwide. Sherex has achieved an impressive growth trajectory and continues to grow through technical solutions selling, providing best total installed cost solutions along with industry leading rivet nut capabilities.

“When combined with our ATLAS® rivet nut brand, the Sherex acquisition positions the company to be the premier provider of rivet nuts worldwide. We are extremely excited to be bringing the expertise of Sherex to the PennEngineering® family,” said Pete George, CEO. “Their entrepreneurial spirit and technical acumen, combined with our ATLAS product line and broader PennEngineering capabilities, will strengthen our ability to quickly deliver innovative, high-quality fastening solutions to our customers around the globe.”

According to Sherex President, Adam Pratt, “teaming up with PennEngineering allows Sherex to provide our customers with additional global manufacturing capability to meet their demands around the world. Our long-standing customer relationships, combined with the reputation and history of PennEngineering will allow us to continue to provide enhanced value to our customers.”

Adam Pratt will assume the role of President of Sherex and ATLAS, reporting to Pete George, CEO of PennEngineering. Alex Hsiao will continue as General Manager, Sherex Taiwan.

About PennEngineering

Since 1942, PennEngineering® has enjoyed a sustained reputation as the global leader in the fastening industry. The company’s brands, PEM®, PROFIL®, ATLAS®, PennAuto®, are considered the premier manufacturer for clinch and mechanically attached fasteners. Haeger®, for installation systems and Heyco® for molded and stamped products.

PennEngineering’s commitment to engineering expertise and global innovation ensures that we continue to grow our portfolio with solutions that allow our customers to not only keep pace with marketplace challenges – but exceed them.

About Sherex

Sherex Fastening Solutions is an innovative manufacturer of fasteners for a variety of industries. Sherex product lines of rivet nuts, clinch nuts, threaded inserts, Disc-Lock® and TEC Series® wedge-locking products, and fastener installation systems are used by many Fortune 500 OEMs to strengthen attachment points while decreasing assembly times and waste.

Read more...
stafda-excellence-in-distribution-program

STAFDA Excellence in Distribution Program

Excellence in Distribution

Registration is open for STAFDA’s highly anticipated Excellence in Distribution program.

The three-day management school is designed specifically for professionals in the construction/industrial distribution and the supply chain industries. STAFDA’s Excellence in Distribution (EiD) will be March 12-14, 2024, at the Nashville Hilton. The new program is an intense management school focused exclusively on wholesale distribution and the supply chain to fill an educational void in the industry. Excellence speakers have been carefully selected based on their years of experience and proven success in their respective fields. Attendees will interact with experts serving our industry who will cover key topics such as outside sales, branch management, HR, profitability, warehousing and inventory, and trending topics like AI and Digital Transformation.

Workshop speakers include Dirk Beveridge, Ken Brown, Nancy Combs, Mike Foster, Paul Reilly, Jon Schreibfeder, Mike Staver, and others.

Agenda: https://excelindist.org/agenda/

Please visit the EiD website for speaker bios, program descriptions, and to register.

Nashville Hilton Downtown

NASHVILLE HILTON DOWNTOWN

121 Fourth Ave. South, Nashville, TN 37201

Join STAFDA at the Nashville Hilton Downtown as they host EiD. Click here to make your reservations. You may also contact the Hilton directly at 615-620-1000 and request the STAFDA/Excellence room block. STAFDA’s room rate is $299/night single or double occupancy.


RELATED CONTENT:

Creating Strong Digital B2B Channels at Industrial Companies

Lessons from transformers: How some distributors reset and won

Education, Fastener News, Fastener News Desk, Fasteners, Featured, Industrial Distribution, Wholesale Distribution

Read more...
solon-manufacturing-celebrating-75-years-in-business

Solon Manufacturing Celebrating 75 Years in Business

FOR IMMEDIATE RELEASE

Solon Manufacturing Company, a premier designer and manufacturer of Belleville spring washers, is proud to announce the celebration of its 75-year anniversary. Since its inception in 1949, Solon Manufacturing Co. has been dedicated to excellence, innovation, and customer satisfaction, and this milestone marks a momentous journey of growth and success.

From humble beginnings— four college friends in a 3,000 sq. foot garage in Solon, Ohio, culminating in a move to a 30,000 sq. foot facility just north of the famous Chardon Square in the center of the state’s snowbelt.

“Celebrating our 75th anniversary is a wonderful opportunity to appreciate our history and how far we’ve come,” said company CEO, Diane Popovich, “Solon has enjoyed significant growth since the early days. Our 50 team members and their commitment to our core values is a testament to our culture— where our customers are the final and most important beneficiaries of outstanding teamwork.”

Solon Manufacturing Co. continues to thrive on the ideals of its founders—refreshing industrialism through creative problem-solving and collaboration across its engineering and manufacturing teams— which makes Solon Manufacturing Co. a recognized name in fastening solutions across many industries. Customers have come to depend on Solon for reliability alongside its projects when it comes to unique industrial bolting applications. Through a shared corporate core focus of ‘we make bolting better®’, the Solon team remains steadfast in exploring new ways to continuously improve product manufacturability and quality, while enhancing the customer experience.

“We are grateful to our customers, suppliers, and employees for the confidence they have placed in us for the past 75 years. They have established the foundation that positioned us for growth and keep us striving for excellence as we look ahead to the next 75 years,” said Popovich.

Solon’s Belleville washer products are high-performing conical-shaped springs that deflect at a given rate, serving as the cornerstone solution for applications subjected to heavy vibrations, cryogenic processes and extreme temperature cycling found in industries from energy to aerospace.

###

Media Contact:

Brianne Norcini

Senior Director, Customer Experience

440.279.4794

bnorcini@solonmfg.com


RELATED CONTENT:

Solon Manufacturing Chosen as First Recipient of 2021 Excellence in Manufacturing Award

Diane Popovich Named President of Solon Manufacturing Company

Fastenating, Fastener Industry, Fastener News, Fastener News Desk

Read more...
in-the-news-with-fastener-news-desk-the-week-of-january-8,-2024

IN THE NEWS with Fastener News Desk the Week of January 8, 2024

Happy New Year greetings! We’re back in the FastenerTV studio ready to deliver the latest in fastener industry trends, news, acquisitions, and upcoming events making headlines the week of January 8, 2024.

Watch now on FastenerTV at YouTube: 


The prestigious Best Booth Awards have been presented to the awardees by Fastener News Desk. The BBA’s highlighted outstanding exhibitors at the 2023 International Fastener Expo (IFE). Since 2014, the Best Booth Awards have served as a testament to the creativity, branding, and design prowess of the exhibitors. Congratulations to all the 2023 Best Booth Award winners!

Fastener News Desk Celebrates the ‘Best Booth Award’ Winners from IFE 2023


 LindFast Solutions Group Has announced that they have completed  the acquisition of Hi-Q Fasteners. Hi-Q provides a complete line of Sems, Thread Forming and Machine Screws, Spacers and Standoffs and Self Clinching Hardware.


 AFC Industries has acquired Chicago Industrial Fasteners (https://cifbolts.com/). Terms of the deal were not disclosed. Founded in 2003 by John and Cathy Price, CIF specializes in the supply of both standard and specialty fasteners to its customer base of original equipment manufacturers, hardware providers, and material fabricators that operate in a variety of end markets, including heavy trucking, automotive, agricultural equipment, and wind and solar power.


The Great Lakes Fasteners Group has acquired Frontier Fastener of Buffalo, New York, to continue its rapid growth plans serving manufacturers and other customers throughout the Northeast. Frontier Fastener has been a Western New York fastener favorite for over 50 years serving a wide variety of customers across many segments. Frontier specializes in special fasteners designed to customer specifications.


Jeffrey F. Koehl Has Been Appointed Chairman of SPIROL International Holding Corporation. Jeff joined the company in 1997 and has been serving as Chairman and Chief Executive Officer of SPIROL since his appointment in 2010. Jeff succeeds his father, Hans H. Koehl, who passed away on November 30, 2023.  Read more: spirol.com


Würth Group has Appointed Dee Ward Senior Vice President of Wurth Industry Asia-Pacific & Africa. Dee is the former CEO of Marine Fasteners has demonstrated a history of leadership and business acumen in the B2B arena. Skilled in Leadership, Sales, Business Management, Nonprofit Organizations, and Volunteer Management.


The 2023 Fastener Distributor Index demonstrated a year of fluctuations and recovery in the fastener distribution market. The 2023 FDI overall average monthly reading, excluding December was 48. The year started with the FDI largely below the neutral threshold of 50, indicating contraction in the market. However, there was a notable shift towards the end of the year, with consistent improvement observed in the later months. The FDI reading in November maintained momentum with a 53.4 reading and the Forward-Looking Indicator surpassing a 50 reading for the first time since July 2022, signaling recovery, optimism, and continued growth moving in to 2024. Stay tuned for the December FDI reading!


Threadheads and FasteNerds tune into the NEW Episode of Fully Threaded Radio Episode 195 Fasteners Third R AI L.  Join Brian and Eric as they wonder who actually writes the news. Listen in at: FullyThreaded.com


 Join WIFI at the Women in the Fastener Industry Virtual Annual Members Meeting – January 16th at 2PM ET, WIFI will dive into a comprehensive review of the past year’s milestones and an exciting preview of what’s to come! They will highlight key moments and celebrate wins, as well as unveil plans, initiatives, and opportunities that promise to elevate the industry and empower women fastener industry professionals even further. Join WIFI as they reflect and set their sights on an even brighter future! Save your spot and register today at FastenerWomen.com


Have you ever wondered why aerospace manufacturers take so many precautions to supply a product that are free of imperfections? During this live webinar the importance of workmanship will be explored. Register now for Workmanship – The Impact of Imperfections and Surface Discontinuities webinar Co-Produced by Industrial Fasteners Institute and Fastener Training Institute which takes place Friday, January 26 12:00 p.m. – 2:00 p.m. EST. Go to https://fastenertrainingevents.com/workmanship.htm  for details.


Registration is now open for the Pac-West 2024 Spring Conference and Tabletop Show! The conference and Tabletop Show are scheduled for March 6 – 8 th in Anaheim, CA. The Spring Conference will feature next-level education, a tabletop show with more than 70 vendors and exciting activities including golf and an Anaheim Ducks hockey game. To register go to pac-west.org/


NFDA Seeking Nominations for the Fastener Professional of the Year Nominations.

The award was created by NFDA to honor individuals and companies that make a substantial positive impact on people’s lives. Membership in NFDA is not a requirement to be selected for the Fastener Professional of the Year award. Self-nominations are acceptable, or nominations can be submitted by others.

Go to nfda-fastener.org to nominate today! The deadline to nominate someone for the 2024 award is February 12, 2024


The Gilchrist Foundation is accepting applications for their 2024 scholarship! Providing scholarships and leadership opportunities for persons engaged in or pursuing careers in the fasteners industry. The application is available at: gilchristfoundation.com. The application is due by May 31, 2024.


Fastener Training Week will be coming to Cleveland, Ohio the week of April 8, 2024. Stay tuned for more details!


Remembrance…

The fastener industry sadly lost several industry veterans in 2023. Join us for a moment of reflection and celebration of life as we remember.


The stories featured in this week’s episode of IN THE NEWS can be found at Fastener News Desk or in our feed @FastenerNews at X.com the twitter rebrand, on LinkedIn in the Fastener News Group and @FastenerNews at Threads! 

If you would like to share your company’s news or events contact me, lisa@fastenernewsdesk.com.  Thanks for tuning in to this week’s episode of ‘IN THE NEWS’ with Fastener News Desk.

Until next week, be well and keep it fastenating.

Sign up for the free FND newsletter designed to keep busy fastener professionals like you up-to-speed on “All things FASTENATING”!

  • Subscribe to receive our weekly newsletter:
  • Join the LinkedIn Fastener News Group:
  • Join the LinkedIn Fastener News Desk page:

RELATED CONTENT:

IN THE NEWS with Fastener News Desk the Week of December 4, 2023


Fastener News Desk, Fastener News Podcast, Fastener TV

Read more...
fastener-distributor-index-(fdi)-|-november-2023

Fastener Distributor Index (FDI) | November 2023

The Fastener Distributor Index (FDI) survey for November, 2023 continued its rebound last month, climbing to 53.4 after reading 52.6 in October, seasonally adjusted. Following suit, the Forward Looking Indicator (FLI) finally inched above the 50 mark for the first time this year, rising to 50.4.

Key Takeaway:

The seasonally adjusted Fastener Distributor Index (FDI) improved m/m and remained above a neutral 50 reading for the second consecutive month, reading 53.4. Comments skewed noticeably more positive this month with many expressing that they are seeing good bookings momentum and feeling growing optimism. The Forward-Looking Indicator (FLI) also improved m/m and finally reached above 50 for the first time since July 2022, reading 50.4. Overall, we view the November FDI/FLI as perhaps indicative of a true stabilization and recovery in fastener markets for the first time in quite a while.

Key Points:

FDI above 50 for two consecutive months. The seasonally adjusted November FDI (53.4) improved from last month (52.6) and marked the second consecutive month of growth (>50). While the FDI has registered a handful of growth readings throughout 2023, the last time the index posted two consecutive >50 readings was June 2022 – perhaps suggesting a real change in underlying demand trends rather than another head fake or anomaly. M/m growth was driven by an improved seasonally adjusted sales index (63.0 vs. 52.6 last month), the employment index (improved to 55.9 from 51.6), and customer inventories (54.4 from 51.6 in October). Respondents indicated they saw growth in bookings and strong daily sales numbers: “I was very surprised this month as daily sales numbers added up more quickly than usual. Nice result.” 35% of respondents indicated sales came in above seasonal expectations (October 44%). Another 38% said sales were in line (22% last month), while just 26% saw weaker sales than

expected (October 34% and 2023 YTD average 39%).

FLI breaks through to growth. The FLI also saw sequential improvement, coming in at 50.4 vs. 47.1 last month. The FLI had gradually climbed towards 50 from a low of 37.8 in April, but this month marked the first growth reading for the index since July 2022. Higher employment levels and a significantly more positive six-month outlook drove the improvement. On the outlook specifically, 47% of respondents predicted higher activity six months from now vs. today compared to just 25% last month. The percentage anticipating similar activity was 29% compared to 47% in October, while the percentage expecting softer activity was 24% (last month 28%). This drove the six-month outlook index to register 61.8 vs. 48.4 last month.

Read full report:

FDI_Report_November_2023


Listen to episode #195 of the Fully Threaded Radio podcast for further commentary.


We encourages all North American fastener distributors to take part in the FDI Monthly Survey.

If you are interested in being a more active part of the fastener industry, you can apply to add your company to the FDI survey group. Complete the “Request an Invitation to Participate” form by clicking here. Once verified, you will receive login ID and password information and you will be notified by email every month when the survey period has been opened.

– Fastener News Desk


About the Fastener Distributor Index (FDI).

The Fastener Distributor Index (FDI) was developed as a service to the fastener industry by the FCH Sourcing Network in 2012 to be a new benchmark for the fastener industry. The FDI is a monthly survey of North American fastener distributors, conducted with the FCH Sourcing Network and Baird. It offers insights into current fastener industry trends/outlooks. Similarly, the Forward-Looking Indicator (FLI) is based on a weighted average of four forward-looking inputs from the FDI survey. This indicator is designed to provide directional perspective on future expectations for fastener market conditions. As diffusion indexes, values above 50.0 signal strength, while readings below 50.0 signal weakness. Over time, results should be directly relevant to Fastenal (FAST) and broadly relevant to other industrial distributors such as W.W. Grainger (GWW) and MSC Industrial (MSM).

The FDI Survey website is a resource than can be accessed by anyone, but it can only be updated by registered users during the monthly open survey period, which occurs during the last week of each month.


RELATED CONTENT:

Fastener Distributor Index (FDI) | October 2023

Fastener Distributor Index (FDI) | September 2023

Fastener Distributor Index, Fastener News

Read more...
in-the-news-with-fastener-news-desk-the-week-of-december-4,-2023

IN THE NEWS with Fastener News Desk the Week of December 4, 2023

Here’s what’s happening in fastener industry news, acquisitions, events, holiday parties and virtual get togethers the week of December 4, 2023.

Watch now on FastenerTV at YouTube: 


Huyett has acquired all the assets and business of the Big H Corporation (Big H), doing business as PacFas and Mobile Fasteners. Big H was founded in 1974 and, over the next 49 years, expanded into 84,000 square feet of industrial space. The acquisition of Big H solidifies Huyett’s market presence as a master distributor of industrial fasteners. Timothy O’Keeffe, CEO of Huyett, states that incorporating Big H’s expertise and established customer relationships into Huyett’s operations represents a significant step forward in the Company’s growth strategy. This move will lay the perfect foundation for a seamless transition into 45,000 new SKUs, largely consisting of threaded fasteners that Huyett previously was not offering. Read more:

Huyett Acquires Big H Corporation, Distributor of Threaded Fasteners


Patriot Bolt Unveils Record-Breaking World’s Largest Hex Nut in Houston, TX! “Big Tex The Incredible Hex” Nut sets a new Guinness World Record! On December 8th the Nut will be installed at the Patriot Bolt HQ. Follow their LinkedIn page for video coverage of the BIG event! Check out our FND’s exclusive interview with Bruce Olivera, VP of Sales at Fastener News Desk. Read more:

Patriot Bolt Sets World Record for the Largest Hex Nut


Martin, Inc. one of the nation’s leading providers of custom-tailored solutions for maintenance, repair, operation, and production supplies, announced the appointment of Scott McDaniel as Executive Vice President, Fastening. In this pivotal role, Scott will spearhead the development and implementation of strategic initiatives for Martin’s Fastening business unit to optimize operational efficiency and profitability, and foster synergy across all Martin business units.  Scott will also provide leadership as a key member of Martin executive leadership group, all aimed at achieving Martin’s overarching business objectives. Read more:

Martin Welcomes Scott McDaniel as Executive Vice President, Fastening


 Economic activity in the manufacturing sector contracted in November for the 13th consecutive month following a 28-month period of growth, say the nation’s supply executives in the latest Manufacturing ISM® Report On Business®.  “The Manufacturing PMI® registered 46.7 percent in November, unchanged from the 46.7 percent recorded in October. The overall economy continued in contraction for a second month after one month of weak expansion preceded by nine months of contraction and a 30-month period of expansion before that. Read more:

Manufacturing PMI® at 46.7%; November 2023 Manufacturing ISM® Report On Business®


Fastener Training Week kicked off today Los Angeles, CA. Taking place December 4 – December 8, 2023, The Fastener Training Institute, and the Industrial Fasteners Institute (IFI) continue their partnership to present Fastener Training Week – five intensive days of education and plant tours as part of the acclaimed FTI Certified Fastener Specialist™ (CFS) advanced technical training program. After completing this invaluable industry training in a small group environment and passing a final exam, attendees are eligible for the CFS designation. Fastener Training Week in Los Angeles, CA is hosted by the Pacific-West Fastener Association. Check out the 2024 Fastener Training schedule: fastenertraining.org


Christmas Parties:


The Metropolitan Fastener Distributors Association will host the MFDA’s 25th Toys for Tots Dinner! Tuesday, December 5th, 2023, at the Sky Room – Hilton Hasbrouck Heights/Meadowlands – Hasbrouck Heights, NJ Register: https://www.mfda.us/calendar/


NEFDA Virtual Holiday Party Thursday, December 7, 2023, 6:00 PM Hosted on Zoom. It’s COLD outside so stay in, get cozy and celebrate the holiday season with us! We’ll start with the Most Festive Drink & Best Holiday Attire at 6:00 PM. Then we’ll get right into Trivia & Raffle Prizes that include: AirPods, Gift Cards, the Ember Mug, and many more to come! Register: https://www.nefda.com/events/


NCFA Holiday Bash at PINS MECHANICAL COMPANY December 7, 2023 @ 6:00 PM Tis the season to celebrate and the NCFA HOLIDAY BASH is the perfect way to start.  Join us at Pins Mechanical Co. for some nostalgic old school entertainment with duckpin bowling and classic arcade games, all while enjoying handcrafted libations including cocktails, slush puppies, punches, mocktails and a variety of beer and wine.  Your registration includes unlimited duckpin bowling, arcade games, drink tickets (4), bar food, reserved bowling lanes and seating area. Space is limited!  Register today! ncfaonline.com


 2023 Pac-West Holiday Party and Toys for Tots Collection Thursday, December 7, 2023. Holiday Inn, La Mirada, CA Back by popular demand, we’re having another casino night! The Pac-West 2023 Annual Holiday Party will again be a casino night featuring blackjack, craps, and roulette. Everyone will start the evening with a $500 chip and five complimentary raffle tickets. Also, everyone’s name will automatically go into several prize drawings without ever playing a casino game! Pac-West.org


MWFA Holiday Party – December 14, 2023. Come celebrate the holiday season and socialize with your fastener friends. Once again, the MWFA will be supporting Toys for Tots. Please be sure to bring an unwrapped toy or cash gift so that no child is left out this Holiday season. MWFA.net


MAFDA’s Annual Toys for Tots Holiday Party will be held Thursday, December 14, 2023, at the Mendenhall Inn in Mendenhall, PA. MAFDA.com


Southwestern Fastener Association Annual Toy Drive Thursday, December 14th, 2023, 5:30 – 8:30 pm at the Buffalo Bayou Brewing Co.- Rooftop in Houston, TX Register: https://www.southwesternfastener.org/index.php?option=com_jevents&task=icalrepeat.detail&evid=56&Itemid=131&year=2023&month=12&day=14&title=toy-drive-houston&uid=c965a4f3d31f10e6a54b030c869563b7


The stories featured in this week’s episode of IN THE NEWS can be found at Fastener News Desk or in our feed @FastenerNews at X.com the twitter rebrand, on LinkedIn in the Fastener News Group and @FastenerNews at Threads!

 If you would like to share your company’s news or events contact me, lisa@fastenernewsdesk.com.  Thanks for tuning in to this week’s episode of ‘IN THE NEWS’ with Fastener News Desk.

Until next week, be well and keep it fastenating.

Sign up for the FREE FND newsletter designed to keep busy fastener professionals like you up-to-speed on “All things FASTENATING”!

  • Subscribe to receive our weekly newsletter:
  • Join the LinkedIn Fastener News Group:
  • Join the LinkedIn Fastener News Desk page:

RELATED CONTENT:

Patriot Bolt Sets World Record for the Largest Hex Nut

Fastener Industry, Fastener News, Fastener TV, Fastener Training

Read more...
patriot-bolt-sets-world-record-for-the-largest-hex-nut

Patriot Bolt Sets World Record for the Largest Hex Nut

Patriot Bolt And Fastener: USA Specialty Bolt & Nut Company

Patriot Bolt Unveils Record-Breaking Achievement: The World’s Largest Hex Nut in Houston, TX

FND INTERVIEW with Bryce Oliveira Patriot Bolt, VP of Sales

FND: Tell us about Patriot Bolt.

Bryce Oliveira: Patriot Bolt is an industry-leading manufacturer of US-made specialty fasteners, bolts, and hardware for bolted connections. We supply businesses with the products and services they need when they need them.

FND: How big is the world’s largest hex nut?

Bryce Oliveira: 16’ across the flats, 19’ across the corners, 9’ thick

FND: How much does the world’s largest hex nut weigh?

Bryce Oliveira: Approximately 4400lbs

FND: What material is “Big Tex The Incredible Hex” Nut made from?

Bryce Oliveira: The nut is made from carbon steel tubing for the internal support, carbon steel sheet for the shell and threads

FND: How was a nut of this magnitude manufactured?

Bryce Oliveira: Formed and welded, we will publish some cool time lapse videos of the manufacturing process soon! One of the impressive features is the helical threads, the threads are actually functional (if you can find a bolt big enough)

FND: Where was the world’s largest hex nut manufactured?

Bryce Oliveira: JK Welding In Cypress, TX right outside of Houston

No alternative text description for this image

Photo credit: JK Welding

FND: Where is the permanent home for the world’s largest hex nut?  

Bryce Oliveira: Patriot Bolt Humble, TX right outside of Houston

FND: Why did Patriot Bolt decide to undertake this project?

Bryce Oliveira: We have always admired the nut Packer Fastener built several years ago.  During Covid, a company in Slovenia took the world record from Packer.  We always joked that the worlds largest hex nut cannot reside in Slovenia! Well that joke kept growing legs and we finally made the decision to build the largest hex nut right here in Houston.  We reached out to JK, designed the nut, and got to work. You know what they say, everything is bigger in Texas.

FND: Will the “Big Tex The Incredible Hex” Nut set a Guinness World Record? 

Bryce Oliveira: Yes, the nut will set the world record by a long shot!

PRESS RELEASE:

Houston, TX — November 22, 2023 — Patriot Bolt a leading innovator in the specialty fastener manufacturing industry, proudly announces the successful production of the world’s largest hex nut in the vibrant city of Houston, Texas. This monumental achievement reflects the company’s commitment to pushing the boundaries of engineering and contributing to the local industrial landscape. The world’s largest hex nut, Big Tex The Incredible Hex, is a symbol of strength and quality and is a testament to the capabilities and craftsmanship that define American manufacturing. Unveiling a Symbol of Strength and Precision Measuring approximately 16 feet in height, our record-breaking hex nut surpasses all expectations. Crafted together with another local manufacturing company, JK Welding, this colossal hex nut stands as a testament to our dedication to excellence in manufacturing.

A Showcase of Engineering Mastery

“The world’s largest hex nut belongs in the State of Texas, Kris Kolb, President”

The Future of Manufacturing in Houston

As we celebrate this achievement, Patriot Bolt remains committed to advancing manufacturing capabilities in Houston. This accomplishment not only underscores our

dedication to quality and precision but also marks a step forward in promoting Houston as a hub for cutting-edge industrial solutions.

About Patriot Bolt

Patriot Bolt has been a driving force in the manufacturing industry, consistently delivering innovative solutions to meet the evolving needs of our clients. With a focus on quality, reliability, and customer service we have established ourselves as leaders in the field.

JK Welding is a full service welding company offering custom fabrication, welding and metal repair to clients in Houston, San Antonio, Austin, Dallas, and the surrounding areas. Our professional welding fabricators provide superior service in our welding shop and field service. Our Section IV, AWS or DNV certified welders are committed to the highest standard of quality workmanship and have the attention to detail needed to ensure your satisfaction. Our experienced welding fabricators, metal workers, and professional shop artists are highly trained, knowledgeable, and experienced at their craft. We have decades of experience and technical skill to handle any custom fabrication job for all commercial and industrial applications, including complete design, installation, and repair services.

Contact Information

For media inquiries, please contact:

Bryce Oliveira Vice President 281-581-0176 bryce@patriotbolt.com


RELATED CONTENT:

Patriot Bolt and Fastener Makes Inc. 5000

Huyett Acquires Big H Corporation, Distributor of Threaded Fasteners

Fastener Industry, Fastener News, Fastener News Desk, Fastener News Podcast, Fasteners

Read more...
martin-welcomes-scott-mcdaniel-as-executive-vice-president,-fastening

Martin Welcomes Scott McDaniel as Executive Vice President, Fastening

FOR IMMEDIATE RELEASE

Martin Welcomes Scott McDaniel as Executive Vice President, Fastening

[Florence, AL] – Martin, one of the nation’s leading providers of custom-tailored solutions for maintenance, repair, operation, and production supplies, is pleased to announce the appointment of Scott McDaniel as Executive Vice President. In this pivotal role, Scott will spearhead the development and implementation of strategic initiatives for Martin’s Fastening business unit to optimize operational efficiency and profitability, and foster synergy across all Martin business units.  Scott will also provide leadership as a key member of Martin executive leadership group, all aimed at achieving the Martin’s overarching business objectives.

Scott has a wealth of experience and expertise in the distribution industry, with a remarkable 25-year career dedicated to the Fastener OEM/C Class Component Sector. His extensive background includes executive roles at prominent companies such as Anixter International, Wurth, and Optimus. Scott’s leadership acumen, combined with his profound industry knowledge and a well-established professional network, uniquely positions him to make a significant impact on the vision and future success at Martin.

Douglas Ruggles, Co-CEO of Martin Supply, stated, “We are excited to welcome Scott to the Martin team. His proven track record of driving growth and his deep understanding of the industry make him the ideal candidate. We look forward to his contributions as we continue to innovate and expand our operations.”

Scott will oversee the team at Martin’s Jackson, TN and Ridgeland, MS locations.

###

About Martin, Inc.

Founded in 1934 and headquartered in Florence, AL, Martin Inc. is one of the nation’s leading providers of custom-tailored solutions for maintenance, repair, operation and production supplies (MROP) to the industrial and construction markets. Martin offers a wide variety of products and services in Industrial, Safety, Integrated Supply, and Fastening – all uniquely designed to help companies operate better. Martin is a member of Affiliated Distributors, the Industrial Supply Association, the National Fasteners Distributor Association, and the Global Sourcing Alliance. For more information, visit  www.martinsupply.com.

Media Contact

Jill Woodford

Marketing Manager

Phone: 256-248-0420

jnwoodford@martinsupply.com


RELATED CONTENT:

Martin Supply Appoints Steve McClanahan as Chief Financial Officer

Martin Inc. Welcomes Scott Feldbush, Executive Vice President, IT and Operations

Fastener Industry, Fastener News, Fastener News Desk, Fastener News Podcast, Fastener People, Featured, Industrial Supply

Read more...